Aeg Washing Machine: squeaking, clanking, burning smell, loud spin

Professional Repair Guide

What is this symptom?

Is your AEG washing machine producing loud noises, squeaking, clanking, or even a burning smell during spin cycles? These symptoms often indicate mechanical stress or friction from unbalanced loads, worn parts, or trapped objects. It's essential to address these issues promptly to prevent further damage.

Urgency: High

Possible Causes

Unbalanced load / uneven distribution of laundry

How to Identify: Noise/loud spin occurs when heavy items are bunched in one area; machine vibrates and shifts position.

Part: Drum and suspension

Worn or slipping drive belt causing squeaking

How to Identify: Squeaking especially during spin; inspect belt for wear/cracks when accessible.

Part: Drive belt

Loose drain hose causing clanking

How to Identify: Clanking sounds at pump stage; hose rattles against rear panel.

Part: Drain hose

Worn suspension/shock absorbers or dampers

How to Identify: Loud banging/clanking during spin as drum moves excessively.

Part: Suspension/shock absorbers

Motor overheating or electrical issue causing burning smell

How to Identify: Burning smell, possibly accompanied by humming or smoke; machine may stop.

Part: Drive motor or electrical system

Preventive Maintenance

Check and clean drain filter: Foreign object noise and clogs
Frequency: monthly
Level the machine and adjust feet: Excessive vibration and noise
Frequency: once after installation or relocation
Inspect belts and suspension yearly: Wear-related squeaks and loud spin
Frequency: annually

Frequently Asked Questions

Why is my AEG Washing Machine squeaking, clanking, burning smell, loud spin?

Common causes include unbalanced loads, worn drive belts, loose drain hoses, and potential motor issues.

How do I fix AEG Washing Machine squeaking, clanking, burning smell, loud spin myself?

No DIY solutions are recommended for these symptoms; professional assistance is advised.

How much does it cost to fix squeaking, clanking, burning smell, loud spin?

Repair costs can vary; consult a professional for an accurate estimate.

When should I call a technician for squeaking, clanking, burning smell, loud spin?

Call a technician immediately if you notice these symptoms to prevent further damage.

References & Sources

Community Analytical Insights

Analysis based on real user discussions from appliance repair communities

Can I Fix This Myself?

65%

DIY Success Rate Difficulty: Either

Common Issues Reported by Users

Worn or damaged drum bearings
Foreign objects lodged in the drum or pump
Faulty motor or motor coupling

User Suggested Solutions

Inspect and replace worn drum bearings. To do this, disconnect the power, remove the back panel, and check the bearings for wear. If damaged, replace them with new ones. Reassemble the machine and test.
Check for foreign objects in the drum or pump. Open the door and inspect the drum for any items. If necessary, remove the drain filter and check for blockages. Clear any debris and reassemble.
Test and replace the motor or motor coupling. Disconnect the power, access the motor, and test it for continuity. If faulty, replace the motor or coupling as needed. Reassemble and test the machine.