AEG Washing Machine Error E13
⚡ Quick Answer: The AEG washing machine E13 error indicates a drainage issue, often stemming from problems with the pressure sensor or water inlet. Symptoms typically... ✅ DIY Fixable
What Does Error E13 Mean?
The AEG washing machine E13 error indicates a drainage issue, often stemming from problems with the pressure sensor or water inlet. Symptoms typically include the machine stopping mid-cycle, failure to fill properly, and unusual sounds during the spin cycle. Addressing E13 often requires checking the water supply, hoses, and pressure components to ensure proper operation.
Common Symptoms:
- Washing machine stops mid‑cycle with E13 displayed
- Issues related to water supply or sensing (failure to fill properly)
- Possible detection of abnormal water pressure or leakage
Possible Causes
- Pressure sensor (pressure switch) fault or water pressure/level abnormality (medium)
- Water inlet valve or water supply blockage/interruption (low)
How to Fix Error E13
DIY Fix Check water supply and basic pressure components
- Turn off and unplug the washing machine.
- Ensure the main water tap to the washer is fully open.
- Inspect the inlet hose for kinks, bends, or visible blockages.
- Check that the hose filters (on both machine and faucet side) are clean.
- Reconnect everything securely and restart the machine to see if the error clears.
Technician Only Inspect and test pressure sensor / inlet components
- Disconnect the washing machine from power.
- Access the internal pressure switch and associated tubing.
- Check for leaks, blockages, or disconnected tubes leading to the pressure switch.
- Test the water inlet valve for proper operation and measure water pressure at fill.
- Replace faulty pressure switch or inlet valve as needed.
Parts needed: Pressure switch / pressure sensor, Inlet valve assembly, Hoses and filters associated with water inlet
- If the error persists after basic supply and hose checks
- If water leakage or internal flooding is suspected
- If a technician’s inspection confirms a faulty internal component
Next step
Choose the next step for E13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
- Typical part-only price
- $25 - $65
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 20-30 ohms |
| part_number | AEG 1240008000 |
| voltage_rating | 230V AC |
Common Questions
What does E13 error mean on AEG washing machine?
E13 indicates a drainage issue, often due to problems with the pressure sensor or water inlet.
Can I fix AEG washing machine E13 error myself?
Yes, you can check the water supply, hoses, and pressure components to resolve E13.
How much does it cost to fix E13 error?
The estimated repair cost is medium, covering parts and labor for the pressure sensor or inlet valve.
When should I call a technician for E13?
Call a technician if the error persists after basic checks or if there are signs of water leakage.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!