Aeg Washing Machine Error E10

⚡ Quick Answer: The AEG washing machine E10 error indicates a water supply issue, preventing the machine from filling with water. This can occur due to a closed water... ✅ DIY Fixable

What Does Error E10 Mean?

The AEG washing machine E10 error indicates a water supply issue, preventing the machine from filling with water. This can occur due to a closed water supply, a blocked or kinked inlet hose, or a faulty water inlet valve. Symptoms include the wash cycle stopping shortly after starting, the display showing E10 with a beep, and no water entering the drum, which may lead to the door remaining locked.

Common Symptoms:

  • Wash cycle stops soon after start
  • Machine displays E10/flash/beep
  • No water entering the drum
  • Door remains locked after failed fill

Possible Causes

  • Closed or insufficient water supply (high)
  • Blocked or kinked inlet hose or inlet filters (high)
  • Faulty water inlet valve or pressure sensing issue (medium)

How to Fix Error E10

DIY Fix Check basic water supply and filters

  1. Ensure the water tap supplying the machine is fully open
  2. Check water pressure by briefly disconnecting inlet hose and filling a bucket
  3. Inspect inlet hose for kinks or damage
  4. Clean inlet hose and faucet filters at both ends

DIY Fix Reset and simple restart

  1. Turn off the washing machine and unplug it
  2. Wait 30 seconds
  3. Plug back in and try a new cycle

Technician Only Test/replace water inlet valve and pressure switch

  1. Disconnect power and water supply
  2. Test continuity of the inlet valve with a multimeter and inspect for electrical issues
  3. Check pressure switch/tubing for proper function
  4. Replace inlet valve or pressure switch if defective

Parts needed: water inlet valve, pressure switch

🛑 When to Call a Pro:
  • After performing recommended user‑level checks without resolution
  • If water supply and hose checks are normal but E10 persists
  • If you are uncomfortable disconnecting hoses or using tools

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 2-5 ohms
part_number AEG 124000000
voltage_rating 230V AC

Common Questions

What does E10 error mean on AEG washing machine?

E10 error indicates a problem with the water inlet valve, causing the machine to fail to fill with water.

Can I fix AEG washing machine E10 error myself?

Yes, check the water supply, hose for kinks, and reset the machine as initial troubleshooting steps.

How much does it cost to fix E10 error?

The estimated repair cost for fixing the E10 error ranges from $50 to $150, depending on the model.

When should I call a technician for E10?

Call a technician if the user-level checks don't resolve the issue or if you're uncomfortable with disconnecting hoses.

Sources & References

Data last verified: 2026-03-13

User Comments (0)

Share your experience or solution below.

Be the first to comment!