AEG Washing Machine: making noise

Possible Causes

Unbalanced load/incorrect drum load

How to Identify: Noise mainly during spin; machine shakes or vibrates noticeably; uneven distribution of clothes in drum.

Part: Drum load distribution

Loose or worn drive belt

How to Identify: Squealing noise or thumping sound during spin; belt appears loose or worn upon inspection.

Part: Drive belt

Worn shock absorbers/suspension components

How to Identify: Loud banging or excessive vibration during spin; machine shifts position.

Part: Suspension/shock absorbers

DIY Solutions

Redistribute laundry and adjust load

Easy 2–5 minutes

1. Pause the machine mid-cycle.
2. Open the door and evenly distribute clothes in the drum.
3. Avoid overloading; restart cycle.

⚠️ Safety First: Do not open door until drum stops spinning.

Check and remove foreign objects

Moderate 10–20 minutes

Tools Needed: Flashlight, gloves

1. Unplug the washing machine.
2. Inspect drum interior visually for small items.
3. Check and clean drain pump filter to remove trapped debris.

⚠️ Safety First: Ensure power is disconnected before accessing internal filter.

Adjust machine leveling

Easy 5–10 minutes

Tools Needed: Spirit level, Wrench

1. Place spirit level on top of machine.
2. Adjust feet until machine sits flat and stable.
3. Retest with a short wash cycle.

⚠️ Safety First: Ensure machine is off and not cycling.

Next step

Choose the next step for making noise

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drive Belt

Transfers rotational power from the motor to turn the drum or tub.

Typical part-only price

$15 - $35

DIY difficulty

Easy

Estimated time

20-30 mins

Optional: enter your model number

Apply

Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Washer Shock Absorber

Dampens tub movement and vibration during high-speed spin cycles.

$25 - $100 · Medium · 45-90 mins

Check fit & price

Model number required

Model-compatible Washing Machine parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Washing Machine Cleaner Tablets

Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.

View maintenance supply

Maintenance supply

Braided Washer Inlet Hoses

A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.

View maintenance supply

Maintenance supply

Washer Drain Hose Holder

Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.

View maintenance supply

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Professional Repairs

Replace drum bearings

Estimated Cost: $150–$400

Drive belt replacement

Estimated Cost: $50–$150

Suspension/shock absorber replacement

Estimated Cost: $100–$300

When to Call a Professional

Grinding or scraping metal-on-metal noises during spin

Persistent loud noises after basic troubleshooting

Visible wobble in drum when hand-spun

Signs of water leaks from seals or bearing areas

Preventive Maintenance

• Check pockets before washing: Foreign object-induced noise and damage
  Frequency: Every load
• Level machine and check feet: Vibration and noise due to imbalance
  Frequency: Monthly
• Clean drain pump filter: Noise from debris in pump
  Frequency: Monthly

Frequently Asked Questions

Why is my AEG Washing Machine making noise?

Common causes include an unbalanced load, loose or worn drive belts, and worn shock absorbers.

How do I fix AEG Washing Machine making noise myself?

You can redistribute laundry, remove foreign objects, or adjust the machine's leveling.

How much does it cost to fix making noise?

Professional repairs can range from $50 for a drive belt replacement to $400 for drum bearings.

When should I call a technician for making noise?

If the noise persists after DIY fixes or if you suspect major component failure, contact a technician.

References & Sources

• Washing machine emits noises and shakes while spinning | AEG Official
• Washing machine emits buzzing sound during washing | AEG Official
• Washer is making loud or unusual noises | Swift Appliance Repair Community
• Unusual Noise During Washing: Foreign Objects in the Drum or Worn Bearings Repair-Blog

User Suggested Solutions

1. Replace the blower motor assembly or air-duct-assembly-glued

Community Discussions

fan started to make a noise

The part is called an 'air-duct-assembly-glued' or 'dryer heater unit'.

Pro needed View on Reddit →

Source: Reddit r/appliancerepair