AEG Washing Machine Error E20
⚡ Quick Answer: The AEG washing machine E20 error code indicates a drainage issue, typically caused by a blocked drain pump filter or a kinked drain hose. This fault ... ✅ DIY Fixable
What Does Error E20 Mean?
The AEG washing machine E20 error code indicates a drainage issue, typically caused by a blocked drain pump filter or a kinked drain hose. This fault prevents the machine from properly draining water, often leaving it in the drum at the end of a wash cycle. Users may experience the E20 code displayed and hear beeping or see flashing lights as signals of the problem. Regular maintenance of the drain components can help avoid this issue.
Common Symptoms:
- Water not draining at the end of a wash cycle
- Machine may stop mid‑cycle with water remaining in the drum
- Display shows E20 error code (sometimes accompanied by E21 in documentation)
- Possible beeps/flashes signalling drainage issue
Possible Causes
- Clogged drain pump filter (high)
- Blocked or kinked drain hose (high)
- Drain pump malfunction or obstruction (medium)
How to Fix Error E20
DIY Fix Check and clean the drain pump filter
- Unplug the washing machine from power for safety.
- Locate the drain pump filter access panel (typically bottom front).
- Place a shallow tray/towel to catch water.
- Open the filter cap and unscrew the filter.
- Remove debris/lint, rinse filter and reinsert securely.
- Run a drain/spin cycle to test.
DIY Fix Inspect and correct drain hose issues
- Ensure the drain hose is positioned at the correct height.
- Check the hose for kinks, sharp bends or visible blockages.
- If possible, detach the hose and flush it out with water to clear obstructions.
- Reattach securely and test a drain/spin cycle.
Technician Only Test and replace drain pump if necessary
- Disconnect power and water supply to the machine.
- Access the drain pump by removing the appropriate panels.
- Inspect the pump for jams or mechanical wear, ensuring the impeller rotates freely.
- Test pump operation electrically with a multimeter if competent.
- Replace the pump if defective.
Parts needed: Drain pump assembly
- If after cleaning the filter and hose the E20 error persists.
- If water leaks or the pump makes unusual noises after basic troubleshooting.
- If internal electrical faults are suspected.
Next step
Choose the next step for E20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E20 error mean on AEG washing machine?
The E20 error indicates a drainage issue, often due to a clogged filter or blocked hose.
Can I fix AEG washing machine E20 error myself?
Yes, you can clean the drain pump filter and check the drain hose for blockages.
How much does it cost to fix E20 error?
The estimated repair cost for the E20 error is medium, varying by model and region.
When should I call a technician for E20?
Call a technician if the E20 error persists after cleaning or if you notice leaks or unusual pump noises.
Sources & References
- AEG support article on E20/E21 drainage error (official)
- AEG Australia support article on E20/E21 (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!