AEG Washing Machine Error EA0

⚡ Quick Answer: The AEG Washing Machine EA0 error signals a malfunction with the drum position sensor or drum positioning system. This error often prevents the drum f... ✅ DIY Fixable

What Does Error EA0 Mean?

The AEG Washing Machine EA0 error signals a malfunction with the drum position sensor or drum positioning system. This error often prevents the drum from rotating properly or detecting its position, leading to the machine stopping during startup or while in a cycle. Unusual noises may also accompany this error, particularly during spin cycles when the drain pump is activated.

Common Symptoms:

  • Machine stops and displays EA0 at startup or during a cycle
  • Drum may fail to rotate or detect proper position

Possible Causes

  • Faulty or malfunctioning drum position sensor (DPS) (high)
  • Drum positioning internal fault (possible sensor wiring or encoder issue) (medium)

How to Fix Error EA0

DIY Fix Basic verification and restart

  1. Turn the washing machine off and unplug from power
  2. Wait 60 seconds then plug back in
  3. Try a short cycle to see if error reappears

Technician Only Inspect and replace drum position sensor or related components

  1. Disconnect power and access the internal drum position sensor (DPS) and wiring loom
  2. Inspect DPS wiring and connector for damage or loose contacts
  3. Test sensor continuity per service manual specifications
  4. Replace faulty sensor and retest functionality

Parts needed: Drum Position Sensor (DPS), Sensor wiring/connector harness

🛑 When to Call a Pro:
  • Error persists after power cycling and basic checks
  • Sensor wiring or component damage suspected beyond simple inspection

Next step

Choose the next step for EA0

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Check during diagnosis

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-20 ohms
part_number AEG 124000000
voltage_rating 230V AC

Common Questions

What does EA0 error mean on AEG Washing Machine?

EA0 indicates a malfunction with the drum position sensor, causing the machine to stop or fail to rotate.

Can I fix AEG Washing Machine EA0 error myself?

Yes, you can try power cycling the machine and running a short cycle to check if the error reappears.

How much does it cost to fix EA0 error?

Repair costs for the EA0 error typically range from $80 to $250, depending on parts and labor.

When should I call a technician for EA0?

Call a technician if the error persists after basic checks or if you suspect wiring or component damage.

Sources & References

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!