AEG Washing Machine Error E68
⚡ Quick Answer: The E68 error code on your AEG washing machine indicates a malfunction in the heating circuit, often due to an earth leakage or heater circuit fault. ... ⚠️ Difficulty Varies
What Does Error E68 Mean?
The E68 error code on your AEG washing machine indicates a malfunction in the heating circuit, often due to an earth leakage or heater circuit fault. This can prevent the wash cycles from completing properly, especially when heating is required, as the water may not reach the desired temperature. It is advisable to check for visible wiring damage or unusual smells before seeking professional help.
Common Symptoms:
- Wash cycles fail when heating is required
- Water does not reach the set temperature
- Cycle stops and displays E68 before or during heating
Possible Causes
- Earth/Leakage fault in heating circuit (heater to earth short) (medium)
- Defective heating element (tubular heater) (medium)
- Wiring insulation damage or related temperature sensor wiring fault (low)
How to Fix Error E68
DIY Fix Basic checks before professional servicing
- Turn off and unplug the washing machine from the power outlet.
- Let the machine sit unplugged for several minutes to clear stored errors.
- Restart the machine and run a short wash without heating (cold wash) to see if other codes clear.
Technician Only Diagnose and repair heating circuit fault
- Verify the error persists with diagnostic tools.
- Perform insulation resistance tests on the heating element to check for earth leakage.
- Inspect and test the heating element/tubular heater continuity and insulation integrity.
- Inspect wiring harness insulation and connectors around the heater and temperature sensor.
- Replace the heating element and/or damaged wiring as needed.
- Verify temperature sensor operation and replace if faulty.
Parts needed: Heating element (tubular heater), Temperature sensor (NTC/thermistor), Wiring harness/connectors related to heating circuit
- If the error persists after basic power cycling.
- If there are visible signs of burned wiring or smell of burning when the error occurs.
- If you are not familiar with high‑voltage appliance servicing.
Next step
Choose the next step for E68
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Mechanism |
| resistance | 10-20 ohms |
| part_number | AEG 1240598001 |
| voltage_rating | 230V AC |
Common Questions
What does E68 error mean on AEG washing machine?
E68 indicates a heating circuit fault, preventing wash cycles from completing and water from reaching the set temperature.
Can I fix AEG washing machine E68 error myself?
You can perform basic checks like power cycling the machine and running a cold wash to see if the error clears.
How much does it cost to fix E68 error?
Repair costs can be significant, often involving replacement of the heating element and wiring, varying by region and model.
When should I call a technician for E68?
Contact a technician if the error persists after basic checks, or if you notice burned wiring or smell burning.
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!