AEG Washing Machine Error E60
⚡ Quick Answer: The AEG Washing Machine E60 error indicates a malfunction in the heating circuit, often linked to the heating element, temperature sensor, or thermost... ✅ DIY Fixable
What Does Error E60 Mean?
The AEG Washing Machine E60 error indicates a malfunction in the heating circuit, often linked to the heating element, temperature sensor, or thermostat. Symptoms include the machine stopping mid-cycle, water not heating, and clothes coming out cold. If the E60 error persists, it may lead to longer wash cycles as the machine struggles to heat water, impacting overall performance.
Common Symptoms:
- Error code E60 (or any code beginning with E6) displayed on the machine
- Machine stops mid‑cycle when heating is required
- Water not heated during wash cycle
- Clothes may come out cold
- Cycle duration may increase due to inability to heat
Possible Causes
- Fault in the heating circuit (heating element, temperature sensor, thermostat or related wiring/relay) (high)
How to Fix Error E60
DIY Fix Basic checks before service call
- Turn off and unplug the washing machine.
- Wait a few minutes and plug it back in to reset the electronics.
- Run a rinse/spin cycle and observe if E60 reoccurs.
Technician Only Diagnose and repair the heating system
- Test heating element continuity and replace if open.
- Check NTC temperature sensor resistance and operation; replace if faulty.
- Inspect thermostat and related relays or wiring for faults.
- Verify control board heating circuit outputs.
Parts needed: Heating element, Temperature (NTC) sensor, Thermostat/thermal cut‑out, Wiring harness and relays
- If E60 persists after a power reset and basic cycle restart.
- If the machine consistently fails to heat water.
- If there are signs of electrical faults, burning smells, or unusual noises.
Next step
Choose the next step for E60
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | 1500W |
|---|---|
| component | Motor Drive Unit |
| resistance | 5-15 ohms |
| part_number | AEG 124123456 |
| voltage_rating | 230V AC |
Common Questions
What does E60 error mean on AEG Washing Machine?
E60 indicates a heating circuit malfunction, causing the machine to stop mid-cycle and fail to heat water.
Can I fix AEG Washing Machine E60 error myself?
Yes, try resetting the machine by unplugging it and running a rinse/spin cycle to see if the error reoccurs.
How much does it cost to fix E60 error?
Repair costs range from ¥15,000 to ¥45,000+, depending on parts and labor needed.
When should I call a technician for E60?
Call a technician if E60 persists after a reset, if the machine fails to heat water, or if you notice unusual smells or noises.
Sources & References
- Washing machine displays error message E60 | AEG (official)
- Storing - Foutcode E60 op wasmachine | AEG (official)
- AEG Washing Machine Error Codes and What They Mean (community)
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!