AEG Washing Machine Error E43
⚡ Quick Answer: The AEG washing machine error E43 indicates a malfunction in the door lock mechanism, preventing the door from locking properly. This issue can cause ... ✅ DIY Fixable
What Does Error E43 Mean?
The AEG washing machine error E43 indicates a malfunction in the door lock mechanism, preventing the door from locking properly. This issue can cause the machine to fail to start or stop mid-cycle. The problem is typically related to a faulty door lock assembly or a control circuit issue, such as a malfunctioning triac that drives the door lock relay.
Common Symptoms:
- Washing machine will not start or stops mid‑cycle with E43 displayed
- Door lock/locking mechanism not engaging or reporting correctly
Possible Causes
- Faulty door lock or door lock control (triac/relay driving the lock) (medium)
How to Fix Error E43
DIY Fix Check door closure and reset
- Ensure washing machine door is fully closed and latched correctly.
- Remove some laundry if overloaded.
- Power off the machine, wait 1–2 minutes, then power it back on to see if the error clears.
Technician Only Inspect and replace door lock assembly or control triac
- Disconnect washer from power.
- Access the door lock assembly and control board.
- Test continuity and operation of the door lock switch and triac/relay driving it.
- Replace faulty door lock unit or control board components as indicated by diagnostics.
Parts needed: Door lock assembly, Control board/triac for door lock relay
- If door latch appears intact and code persists after basic checks
- If internal control electronics or wiring issues are suspected
Next step
Choose the next step for E43
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does E43 error mean on AEG washing machine?
E43 indicates a door lock malfunction, preventing the machine from starting.
Can I fix AEG washing machine E43 error myself?
Yes, check the door closure and reset the machine to clear the error.
How much does it cost to fix E43 error?
Estimated repair costs range from $80 to $300, depending on the issue.
When should I call a technician for E43?
Call a technician if the door latch appears intact and the error persists after basic checks.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!