AEG Washing Machine Error E40
⚡ Quick Answer: The AEG washing machine error E40 indicates a malfunction in the door lock mechanism, often caused by the door not being closed or latched properly. T... ✅ DIY Fixable
What Does Error E40 Mean?
The AEG washing machine error E40 indicates a malfunction in the door lock mechanism, often caused by the door not being closed or latched properly. This error prevents the machine from starting, with the display showing E40 along with beeping or flashing lights. To resolve this, ensure the door is fully closed until you hear a solid click, check the door seal for trapped items, and avoid overloading the machine.
Common Symptoms:
- Machine does not start with door open
- E40 displayed with beeps or flashes
- Cycle won’t begin until door closes properly
Possible Causes
- Door not closed or latched properly (high)
- Faulty door lock/interlock assembly (high)
How to Fix Error E40
DIY Fix Check and secure the door/lid
- Make sure the door is fully closed until you hear a solid click
- Inspect the door seal and remove any trapped laundry
- Avoid overloading the machine so the door can close properly
Technician Only Inspect and replace door lock/interlock assembly
- Disconnect power to the machine
- Remove the door seal and access the door lock assembly
- Check wiring connections for damage or loose contacts
- Replace the door lock/interlock mechanism if defective
Parts needed: Door lock/interlock assembly, Door seal if damaged
- If E40 persists after confirming door closure and unloading excess laundry
- If door lock/interlock assembly inspection reveals damage or electrical issues
Next step
Choose the next step for E40
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other components that may be involved
Check these only if your diagnosis points to them.
Door Gasket
Creates a watertight seal around the door to prevent leaks during operation.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Mechanism |
| resistance | 1-2 ohms |
| part_number | AEG 1241002007 |
| voltage_rating | 230V AC |
Common Questions
What does E40 error mean on AEG washing machine?
E40 error indicates a malfunction in the door lock mechanism, preventing the machine from starting.
Can I fix AEG washing machine E40 error myself?
Yes, check the door closure, inspect the door seal, and ensure the machine isn't overloaded.
How much does it cost to fix E40 error?
The estimated repair cost ranges from $50 to $200, including parts and labor.
When should I call a technician for E40?
Call a technician if E40 persists after ensuring the door is closed or if the door lock assembly shows damage.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!