AEG Washing Machine Error E22

⚡ Quick Answer: The AEG washing machine E22 error code indicates a drainage issue, often manifesting as water remaining in the drum or the machine halting during the ... ✅ DIY Fixable

What Does Error E22 Mean?

The AEG washing machine E22 error code indicates a drainage issue, often manifesting as water remaining in the drum or the machine halting during the spin cycle. This error suggests that the washing machine is not draining water properly, potentially due to a blocked drain filter, a kinked or clogged drain hose, or a malfunctioning drain pump. Regular maintenance and checks can help prevent this issue from occurring.

Common Symptoms:

  • Washing machine stops before or during spin/dry cycle
  • Water remains in the drum
  • Slow or no drain of wash water

Possible Causes

  • Blocked or clogged drain filter (medium)
  • Drain hose kinked, incorrectly positioned, or clogged (medium)
  • Drain pump or pump component failure (medium)

How to Fix Error E22

DIY Fix Check and clean drain filter

  1. Turn off and unplug the washing machine.
  2. Open the bottom front service flap.
  3. Place a shallow tray or towel under the filter area to catch water.
  4. Unscrew and remove the drain filter.
  5. Clean out lint, debris, or foreign objects.
  6. Reinstall the filter securely and close the flap.

DIY Fix Inspect drain hose routing and clear obstructions

  1. Unplug and move the washer to access rear drain hose.
  2. Check that the hose is not kinked, bent sharply, or elevated above recommended height.
  3. Disconnect hose and inspect inside for clogs.
  4. If clogged, flush with water or use a soft brush to clear debris.
  5. Reattach hose correctly and test a drain/spin cycle.

Technician Only Test and replace drain pump assembly

  1. Disconnect machine from mains and water.
  2. Remove back or bottom panel to access drain pump.
  3. Test drain pump electrical continuity with a multimeter.
  4. Inspect pump impeller for damage or jams.
  5. Replace pump if defective or impeller is broken.
  6. Reassemble and run test cycle.

Parts needed: Drain pump assembly

🛑 When to Call a Pro:
  • After trying user-level drainage checks if error persists
  • If water remains stuck and you cannot access drain components safely
  • If internal pump testing suggests electrical or mechanical failure

Next step

Choose the next step for E22

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Based on diagnostic data

Most relevant component to inspect

Drain Pump

Pumps waste water out of the appliance during the drain cycle.

Typical part-only price
$35 - $80
DIY difficulty
Easy
Estimated time
15-30 mins
Where can I find the model number?

Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.

Find a part that fits my model

Verify the complete model and part number on the retailer's compatibility page before ordering.

Also check
RepairClinic

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Technical Specifications

wattage 40W
component Drain Pump
resistance 30-50 ohms
part_number AEG 124000000
voltage_rating 230V AC

Common Questions

What does E22 error mean on AEG washing machine?

The E22 error means there is a drainage issue, causing water to remain in the drum and stopping the machine during cycles.

Can I fix AEG washing machine E22 error myself?

Yes, you can check and clean the drain filter and inspect the drain hose for kinks or clogs.

How much does it cost to fix E22 error?

The estimated cost to fix the E22 error ranges from $80 to $250, depending on parts and labor.

When should I call a technician for E22?

Call a technician if the error persists after your checks, if water remains stuck, or if there's a suspected internal pump failure.

Sources & References

Data last verified: 2026-07-26

User Comments (0)

Share your experience or solution below.

Be the first to comment!