AEG Washing Machine Error C3
⚡ Quick Answer: The AEG Washing Machine C3 error indicates a drainage issue, often linked to water leakage detected within the machine. You may hear unusual sounds fr... ✅ DIY Fixable
What Does Error C3 Mean?
The AEG Washing Machine C3 error indicates a drainage issue, often linked to water leakage detected within the machine. You may hear unusual sounds from the pump, and the display may show prolonged cycle times. This error can also appear as E30, suggesting water is present at the bottom tray or inside the unit, potentially due to a leak in the supply hose or door seal.
Common Symptoms:
- Display shows C3 or E30
- Machine may emit 3 beeps and stop mid‑cycle
- Water detected at bottom tray or inside unit
Possible Causes
- Water leak inside machine (e.g., supply hose/leak into base tray) (high)
- Leak at door seal or laundry caught causing water escape (medium)
How to Fix Error C3
DIY Fix Check for leaks and resolve simple causes
- Turn off and unplug the washing machine
- Inspect water supply hose connections at tap and machine for leaks
- Check door seal for trapped laundry or damage and clear any trapped items
- Ensure drain hose is not kinked and positioned correctly
Technician Only Service inspection for persistent leaks
- Diagnose for internal water ingress paths (hoses, seals, tub assembly)
- Test/replace faulty door seal or supply hose
- Examine internal drainage and float/pressure sensors for proper operation
Parts needed: Door seal, Supply hose, Drain components, Water level/pressure sensor
- Leak persists after basic checks
- Signs of water inside machine base tray
- Repeated C3/E30 despite corrective attempts
Next step
Choose the next step for C3
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Gasket
Creates a watertight seal around the door to prevent leaks during operation.
- Typical part-only price
- $45 - $110
- DIY difficulty
- Medium
- Estimated time
- 30-60 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 20-30 ohms |
| part_number | AEG 1245001005 |
| voltage_rating | 230V AC |
Common Questions
What does C3 error mean on AEG Washing Machine?
C3 error indicates a drainage issue, often due to water leakage inside the machine.
Can I fix AEG Washing Machine C3 error myself?
Yes, check for leaks, inspect water supply hose connections, and examine the door seal for damage.
How much does it cost to fix C3 error?
Estimated repair costs range from $100 to $300+, depending on the necessary parts.
When should I call a technician for C3?
Call a technician if leaks persist after checks or if you see water in the machine base tray.
Sources & References
Data last verified: 2026-07-26
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!