Samsung Refrigerator Error Er FS

⚡ Quick Answer: Er FS means Samsung Refrigerator error Er FS indicates a failure in the freezer temperature sensor, which may cause the display to s... This is typically a DIY fix.

What Does Error Er FS Mean?

Samsung Refrigerator error Er FS indicates a failure in the freezer temperature sensor, which may cause the display to show incorrect temperatures or trigger cooling issues.

Common Causes

  • Freezer temperature sensor (60% likelihood)
  • Wiring issues (30% likelihood)
  • Control board malfunction (10% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the freezer temperature sensor

    Locate the sensor inside the freezer compartment. Check for any visible damage or disconnection.

    Ensure the sensor is securely connected.

  2. Step 2: Test the sensor with a multimeter

    Disconnect the sensor and use a multimeter to check its resistance. It should typically read between 5k to 10k ohms at room temperature.

    If the reading is outside this range, replace the sensor.

  3. Step 3: Check wiring for damage

    Inspect the wires leading to the sensor for any signs of wear or damage. Repair or replace any damaged wiring.

    Ensure all connections are tight and secure.

  4. Step 4: Replace the freezer temperature sensor

    If the sensor is faulty, remove it from its housing and replace it with a new one. Reconnect all wires securely.

    Ensure the new sensor is compatible with your refrigerator model.

  5. Step 5: Reset the refrigerator

    After replacing the sensor, reset the refrigerator by unplugging it for a few minutes and then plugging it back in.

    This helps clear any error codes.

How to Reset

To reset the Er FS error, unplug the refrigerator for 5 minutes, then plug it back in and check if the error persists.

Technical Specifications

wattage
component Freezer Temperature Sensor
resistance 5k to 10k ohms
part_number DA32-10105N
voltage_rating 5V DC

Frequently Asked Questions

Can I replace the freezer temperature sensor myself?

Yes, if you have basic tools and follow safety precautions, you can replace the sensor.

How much does it cost to fix the Er FS error?

The cost of a replacement sensor typically ranges from $20 to $50, plus any additional tools you may need.

What causes the Er FS error to occur?

The error is usually caused by a malfunctioning freezer temperature sensor or issues with its wiring.

Should I call a technician if the error persists?

Yes, if you have replaced the sensor and the error continues, it may indicate a control board issue.

When should I expect the error to clear after repairs?

The error should clear shortly after the sensor is replaced and the refrigerator is reset.

User Comments (0)

Share your experience or solution below.

Be the first to comment!