Samsung Refrigerator Error 1E
⚡ Quick Answer: The Samsung Refrigerator error code 1E indicates an abnormal condition often linked to power interruptions or internal sensor communication failures. ... ✅ DIY Fixable
What Does Error 1E Mean?
The Samsung Refrigerator error code 1E indicates an abnormal condition often linked to power interruptions or internal sensor communication failures. This can lead to a lack of ice production, erratic cooling, and potential water leakage. If the 1E code appears after a power fluctuation, it's crucial to check the stability of the power supply and perform a reset to see if the issue resolves itself.
Common Symptoms:
- 1E displayed on panel after power loss or power fluctuation
- Fridge may beep or blink when 1E appears
- Cooling may stop or become erratic when error persists
Possible Causes
- Power interruption or power instability (medium)
- Sensor communication interruption (medium)
How to Fix Error 1E
DIY Fix Perform a basic reset and check power
- Unplug refrigerator from the wall outlet.
- Wait 5–10 minutes to allow the system to fully power down.
- Ensure the power outlet is stable and not affected by surge protectors or extension cords.
- Plug the refrigerator back in and observe if 1E clears.
Technician Only Inspect internal sensor communication and power supply circuits
- Use diagnostic tools to check voltage stability at the main control board.
- Inspect communication harnesses between sensors and control board for loose connections or damage.
- Test key sensors (e.g., temperature or ice level sensor) for proper response.
- Replace faulty wiring or sensors as needed.
Parts needed: Temperature/ice sensor harnesses, Control board (if confirmed faulty), Power supply components
- 1E code persists after reset and stable power confirmed
- Unusual noises, smells, or significant cooling loss accompanies the error
- Internal communication harness appears damaged or sensors fail diagnostics
Next step
Choose the next step for 1E
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Refrigerator parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Refrigerator Condenser Coil Brush
For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.
Model-Compatible Refrigerator Water Filter
A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.
Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 10W |
|---|---|
| component | Water Inlet Valve |
| resistance | 3-5 ohms |
| part_number | DA62-02360A |
| voltage_rating | 120V AC |
Common Questions
What does 1E error mean on Samsung Refrigerator?
The 1E error signifies a power interruption or sensor communication issue, affecting ice production and cooling.
Can I fix Samsung Refrigerator 1E error myself?
Yes, you can try unplugging the refrigerator for 5-10 minutes to reset it and check the power supply.
How much does it cost to fix 1E error?
Repair costs for the 1E error range from ¥10,000 to ¥30,000+, depending on the parts needed.
When should I call a technician for 1E?
Call a technician if the 1E code persists after a reset, or if you notice unusual noises or significant cooling loss.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!