Samsung Refrigerator Error 2E

⚡ Quick Answer: The Samsung Refrigerator error code 2E indicates a malfunction with the temperature sensor, which can lead to abnormal temperature readings and improp... ✅ DIY Fixable

What Does Error 2E Mean?

The Samsung Refrigerator error code 2E indicates a malfunction with the temperature sensor, which can lead to abnormal temperature readings and improper cooling. This error often occurs due to a failure or disconnection of the fridge's temperature sensor, potentially accompanied by unusual noises or an inability to produce ice. It’s essential to address this issue promptly to avoid further complications.

Common Symptoms:

  • 2E displayed on fridge control panel
  • Temperature readings abnormal or fridge not cooling properly

Possible Causes

  • Fridge temperature sensor failure or disconnection (high)
  • Sensor wiring connection issue (loose/poor contact) (medium)

How to Fix Error 2E

DIY Fix Power Reset to Retry Sensor Detection

  1. Unplug refrigerator from mains or switch off breaker.
  2. Wait 5 minutes to allow internal electronics to discharge.
  3. Reconnect power and monitor for error reappearance.

Technician Only Inspect and Replace Faulty Temperature Sensor

  1. Access refrigerator temperature sensor location (typically inside fridge compartment).
  2. Check sensor wiring harness and connector for secure connection and no damage.
  3. Test sensor resistance/continuity; replace if open/shorted.
  4. Reassemble and verify operation, ensuring no error persists.

Parts needed: Refrigerator temperature sensor, Wiring harness/connector as needed

🛑 When to Call a Pro:
  • If the error persists after reset and basic checks, or if you are uncomfortable accessing internal components safely.

Next step

Choose the next step for 2E

Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.

Other parts options

Check related components first; use model search as a fallback.

Possible related component

Wiring Harness

Connects controls, sensors, motors, and other electrical components inside the appliance.

$20 - $120 · Medium · 30-90 mins

Check fit & price
Model number required

Model-compatible Refrigerator parts

Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.

Find a part that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.

Optional routine care

Maintenance supplies

These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.

Maintenance supply

Refrigerator Condenser Coil Brush

For routine cleaning of accessible condenser areas where the manufacturer permits it. It does not repair a sealed-system or compressor fault.

View maintenance supply
Maintenance supply

Model-Compatible Refrigerator Water Filter

A routine replacement item on models with a water filter. Match the complete appliance model and existing filter number before ordering.

Compatibility check required: use the complete appliance model and compare the existing filter, bag, or specification before ordering.

Find one that fits my model

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.

Technical Specifications

wattage N/A
component Ice Maker Sensor
resistance 10-30 ohms
part_number DA97-14566A
voltage_rating 120V AC

Common Questions

What does 2E error mean on Samsung Refrigerator?

The 2E error indicates a malfunctioning temperature sensor, leading to abnormal temperature readings.

Can I fix Samsung Refrigerator 2E error myself?

Yes, you can attempt a power reset to retry sensor detection. Unplug for 5 minutes and then reconnect.

How much does it cost to fix 2E error?

The estimated repair cost for the 2E error ranges from $30 to $150.

When should I call a technician for 2E?

Call a technician if the error persists after a reset or if you're uncomfortable accessing internal components.

Sources & References

Data last verified: 2026-07-22

User Comments (0)

Share your experience or solution below.

Be the first to comment!