Monogram Washing Machine Error INT

⚡ Quick Answer: The INT error code on your Monogram washing machine signifies an interrupted wash cycle, often due to a failure in the door lock mechanism. This may r... ✅ DIY Fixable

What Does Error INT Mean?

The INT error code on your Monogram washing machine signifies an interrupted wash cycle, often due to a failure in the door lock mechanism. This may result in the door being stuck or not sealing properly, causing the machine to pause or stop mid-cycle. To resolve this, check if the pause or cancel button was accidentally pressed, and try resetting the machine by powering it off and on again.

Common Symptoms:

  • Display shows “INT” and washer pauses or stops mid‑cycle
  • Washer may be draining/spinning slowly as it winds down the interrupted cycle
  • No specific fault (e.g., water fill/drain fault) indicated beyond an interrupted cycle

Possible Causes

  • Interrupted or canceled cycle (medium)

How to Fix Error INT

DIY Fix Clear the INT and resume normal operation

  1. If the washer display shows INT, check whether a pause/cancel button was pressed accidentally
  2. Press the pause/cancel button twice and then press power once to clear the code (procedure described for Whirlpool washers) turn
  3. If it persists, power off the washer, wait ~1 minute, then power back on to reset controls turn

Technician Only Evaluate control and cycle interruption behavior

  1. Check the washer’s control board logs for repeated interruptions
  2. Test the cycle start/pause switch and door/lid interlock to ensure unintended pauses aren’t triggered
  3. Verify proper spin/drain operation once INT clears

Parts needed: Start/Pause switch assembly, Door/lid interlock, Control board (if fault confirmed)

🛑 When to Call a Pro:
  • If the INT error persists after power reset and normal cycle start attempts
  • If the washer fails to drain, spin, or operate normally after clearing the INT code

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number ZMWL-LOCK-001
voltage_rating 120V AC

Common Questions

What does INT error mean on monogram washing machine?

The INT error indicates an interrupted wash cycle, often due to a door lock failure.

Can I fix monogram washing machine INT error myself?

Yes, you can try clearing the error by checking for accidental pauses and resetting the machine.

How much does it cost to fix INT error?

Estimated repair costs range from $50 to $300, depending on parts and labor.

When should I call a technician for INT?

Call a technician if the error persists after a reset or if the washer fails to operate normally.

Sources & References

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!