Monogram Washing Machine Error F5-E2
⚡ Quick Answer: The Monogram washing machine error F5-E2 indicates a malfunction in the door lock mechanism. This error typically prevents the washer from starting or... ✅ DIY Fixable
What Does Error F5-E2 Mean?
The Monogram washing machine error F5-E2 indicates a malfunction in the door lock mechanism. This error typically prevents the washer from starting or continuing its cycle, as the door appears closed but fails to lock properly. The issue may stem from a door that is not fully engaging the lock or a faulty lid lock/latch mechanism. You may hear persistent beeping sounds during operation, signaling the need for attention.
Common Symptoms:
- Washer refuses to start or continue cycle
- Door/lid appears closed but not locking
- Error appears immediately at start or when attempting to lock lid
Possible Causes
- Door/lid not fully engaging the lock (medium)
- Faulty lid lock/latch mechanism or switch (medium)
How to Fix Error F5-E2
DIY Fix Check and re-seat door/lid closure
- Ensure no clothing items or debris are caught in the door/lid seal or latch area.
- Open and firmly close the door/lid so it fully engages the latch.
- Attempt to start a wash cycle again.
DIY Fix Power reset the washer
- Unplug the washer or switch off its dedicated circuit breaker.
- Wait 5 minutes to allow the electronic control to fully reset.
- Restore power and attempt to start a cycle.
Technician Only Inspect/replace lid lock/latch assembly
- Disconnect power to the washer.
- Remove access panels to reach the door/lid lock assembly.
- Test the lid lock switch and actuator for proper engagement and electrical continuity.
- Replace the lid lock/latch assembly if failed tests or obvious physical wear/damage are present.
Parts needed: lid lock assembly, lid switch
- If lid lock tests good and error persists after reset and visual inspections
- If wiring to the lock assembly appears damaged or shorted
- If the washer displays additional unrelated error codes
Next step
Choose the next step for F5-E2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F5-E2 error mean on monogram washing machine?
It indicates a malfunction in the door lock mechanism, preventing the washer from starting.
Can I fix monogram washing machine F5-E2 error myself?
Yes, check the door seal, ensure it's fully closed, and reset the power.
How much does it cost to fix F5-E2 error?
Repair costs range from $80 to $250 for parts and labor.
When should I call a technician for F5-E2?
Call if the error persists after resets, or if wiring appears damaged.
Sources & References
- F5 E2 - Error Code - Product Help | Maytag (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!