Monogram Washing Machine Error F8-E1-LO-FL
⚡ Quick Answer: The Monogram washing machine error F8-E1-LO-FL signals a low water level detection issue. This typically manifests as the machine failing to fill with... ✅ DIY Fixable
What Does Error F8-E1-LO-FL Mean?
The Monogram washing machine error F8-E1-LO-FL signals a low water level detection issue. This typically manifests as the machine failing to fill with water, a flashing display, and the washer possibly entering a drain routine. Common causes include insufficient incoming water, clogged water inlet valve screens, or a malfunctioning inlet valve.
Common Symptoms:
- Washer fails to fill with water as expected
- Door may lock and control becomes unresponsive
- Washer may initiate drain routine when error appears
Possible Causes
- Insufficient incoming water detected (medium)
- Clogged water inlet valve screens or failing inlet valve (medium)
How to Fix Error F8-E1-LO-FL
DIY Fix Verify and restore water supply
- Ensure both hot and cold water supply valves are fully open.
- Check that water inlet hoses are not kinked, twisted, or blocked.
- Inspect hose connections at washer and wall for tightness.
DIY Fix Check and clean inlet hose screens
- Turn off water to the washer.
- Disconnect water supply hoses from the washer.
- Inspect inlet screens for debris or mineral buildup.
- Clean screens gently with a soft brush if clogged.
- Reconnect hoses securely.
Technician Only Test and potentially replace water inlet valve
- Disconnect power and water to the washer.
- Access the water inlet valve assembly at the back of the washer.
- Test valve solenoids for continuity and proper operation with multimeter.
- Replace the inlet valve if it fails testing.
Parts needed: water inlet valve assembly
- If error persists after checking water supply, hoses, and inlet valve cleaning
- If there are signs of internal water level sensor or pressure sensor faults
- If any electrical component tests indicate failure
Next step
Choose the next step for F8-E1-LO-FL
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F8-E1-LO-FL error mean on monogram washing machine?
It indicates a low water level detection issue, often due to insufficient water supply or valve problems.
Can I fix monogram washing machine F8-E1-LO-FL error myself?
Yes, check the water supply, clean inlet hose screens, and ensure hoses are properly connected.
How much does it cost to fix F8-E1-LO-FL error?
Repair costs range from $50 to $200, depending on parts and labor.
When should I call a technician for F8-E1-LO-FL?
Call a technician if the error persists after basic checks or if internal sensor faults are suspected.
Sources & References
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!