Monogram Washing Machine Error F9-E1
⚡ Quick Answer: The F9-E1 error on Monogram washing machines indicates a drain pump failure, preventing the washer from draining water properly. Symptoms include wate... ✅ DIY Fixable
What Does Error F9-E1 Mean?
The F9-E1 error on Monogram washing machines indicates a drain pump failure, preventing the washer from draining water properly. Symptoms include water remaining in the tub and the cycle halting during the drain or spin phase. The error often arises from drain system obstructions or a malfunctioning drain pump that needs inspection and potentially service.
Common Symptoms:
- Washer fails to drain within expected time
- Water remains in tub and cycle stops
- Error displayed during drain/spin phase
Possible Causes
- Drain system obstruction or failure (community/general info) (medium)
- Drain pump malfunction (community/general info) (medium)
How to Fix Error F9-E1
DIY Fix Check basic drainage and reset
- Unplug washer from power for at least 5 minutes to reset control logic.
- Verify drain hose is not kinked, crushed, or blocked.
- Check that drain hose is at correct height and position.
- Inspect accessible drain pump filter (if present) and clean debris.
Technician Only Inspect and service drain components
- Remove lower access panel to inspect drain pump and filter assembly.
- Check drain pump impeller for obstructions or damage.
- Test drain pump electrical function with multimeter; replace if failed.
- Inspect and clear any blockages in internal drain pathways and hoses.
Parts needed: drain pump assembly, drain pump filter (if applicable), drain hose
- If water remains after attempted basic drainage cleaning
- If error persists after basic reset and cleaning
- If unfamiliar with appliance disassembly or electrical diagnostics
Next step
Choose the next step for F9-E1
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F9-E1 error mean on monogram washing machine?
F9-E1 indicates a drain pump failure, causing the washer to stop draining water.
Can I fix monogram washing machine F9-E1 error myself?
Yes, check for kinks in the drain hose, reset the machine, and ensure proper drainage.
How much does it cost to fix F9-E1 error?
Estimated repair costs range from $80 to $250, depending on parts and labor.
When should I call a technician for F9-E1?
Call a technician if water remains after cleaning, if the error persists, or if you're unsure about repairs.
Sources & References
- How to Fix Whirlpool Washer E1/F9 Error Codes (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!