Maytag Oven Error PF
⚡ Quick Answer: The Maytag Oven PF error indicates a power failure, resulting from an interruption in electrical power. This leads to the display flashing and the nee... ✅ DIY Fixable
What Does Error PF Mean?
The Maytag Oven PF error indicates a power failure, resulting from an interruption in electrical power. This leads to the display flashing and the need to reset settings and timers before the oven resumes normal operation. Causes often include power outages, fluctuations, or a tripped circuit breaker.
Common Symptoms:
- Display shows PF after a power outage or fluctuation
- Oven clock or timer resets or is flashing
- Oven doesn’t proceed with cooking until PF is cleared
Possible Causes
- Power interruption / power fluctuation (high)
- Tripped circuit breaker or unstable supply (medium)
How to Fix Error PF
DIY Fix Clear PF code and reset oven
- Press the Cancel/Off button on the oven control to clear the PF display
- If the clock is flashing, set the correct time following the display prompts or manual instructions
- Ensure oven controls respond normally after clearing the code
DIY Fix Check electrical power and connections
- Check your circuit breaker panel to ensure the oven’s breaker has not tripped or partially tripped
- Confirm the oven is properly connected to its dedicated electrical circuit
- Test the outlet and power supply stability; if unstable, consult an electrician
Technician Only Inspect and service unstable power related issues
- Verify wiring and connections to oven junction box and control board for loose or damaged connections
- Measure voltage at the oven’s power terminal to ensure consistent supply
- If control board is damaged by repeated power issues, test and replace control board if necessary
Parts needed: multimeter, replacement control board (if damaged), terminal wiring connectors
- PF error persists after clearing and stable power is confirmed
- Frequent reoccurrence of PF indicating possible internal control board or wiring issues
- Any signs of electrical smell, burning, or other abnormal behavior
Next step
Choose the next step for PF
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does PF error mean on Maytag Oven?
The PF error indicates a power failure, causing the display to flash and settings to reset.
Can I fix Maytag Oven PF error myself?
Yes, you can clear the PF code by pressing Cancel/Off and resetting the clock if needed.
How much does it cost to fix PF error?
The estimated repair cost for resolving PF error ranges from $100 to $350.
When should I call a technician for PF?
Call a technician if the PF error persists after clearing and stable power is confirmed.
Sources & References
- Maytag Oven Error Code Documentation (PF) (official)
- What Should I Do If My Oven Displays 'PF'? (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!