Maytag Oven Error F2
⚡ Quick Answer: The Maytag oven error F2 signifies a temperature sensor malfunction, leading to incorrect temperature regulation, erratic heating, or the oven failing... ⚠️ Difficulty Varies
What Does Error F2 Mean?
The Maytag oven error F2 signifies a temperature sensor malfunction, leading to incorrect temperature regulation, erratic heating, or the oven failing to heat entirely. This error typically appears during heating cycles and may persist even after a reset. If left unresolved, it can lead to runaway heating or unsafe conditions. It is crucial to address this issue promptly to ensure safe and efficient oven operation.
Common Symptoms:
- Error appears on display during heating cycles
- Oven may stop heating or shut down
- Temperature regulation incorrect or runaway heating
- Code persists after reset
Possible Causes
- Faulty oven temperature sensor (high)
- Control board or relay component malfunction affecting temperature control (medium)
How to Fix Error F2
DIY Fix Power cycle and basic reset
- Turn off power at circuit breaker for at least 1 minute
- Restore power and observe if error returns
- Avoid using the oven if the error persists
Technician Only Test and replace temperature sensor
- Disconnect power to oven
- Access oven interior and locate temperature sensor (typically at back wall)
- Disconnect sensor and test resistance with a multimeter (approx ~1080 ohms at room temp d by technicians)
- Replace sensor if out of specification
- Reassemble and test oven functionality
Parts needed: Oven temperature sensor, Multimeter
Technician Only Inspect and diagnose control/relay board
- Disconnect oven power
- Access and inspect oven control board and associated relay components
- Check for signs of damage, burnt spots or wiring faults
- Replace control/relay board if confirmed defective
Parts needed: Control/relay board
- If error persists after power cycle and DIY sensor test
- If oven door remains locked or unsafe conditions persist
- If there is visible damage to control board wiring
Next step
Choose the next step for F2
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1,000 ohms at room temperature |
| part_number | W10700193 |
| voltage_rating | 120V AC |
Common Questions
What does F2 error mean on Maytag oven?
The F2 error indicates a malfunction in the oven's temperature sensor, causing erratic temperature readings.
Can I fix Maytag oven F2 error myself?
Yes, you can attempt a power cycle and basic reset, but avoid using the oven if the error persists.
How much does it cost to fix F2 error?
The estimated repair cost for the F2 error is between $50 and $200.
When should I call a technician for F2?
Call a technician if the error continues after DIY tests, if the oven door locks, or if there is visible damage to the control board.
Sources & References
- Maytag F2 Error Code description (official)
- Maytag Oven Error Code F2 explained (community)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!