Maytag Oven Error LOC
⚡ Quick Answer: The Maytag Oven LOC error indicates that the control lock feature is currently engaged, rendering the control panel unresponsive. This prevents any bu... ✅ DIY Fixable
What Does Error LOC Mean?
The Maytag Oven LOC error indicates that the control lock feature is currently engaged, rendering the control panel unresponsive. This prevents any button presses, making it impossible to set the temperature or start a cooking cycle. To resolve this, you need to deactivate the control lock manually or perform a power reset if the lock remains engaged.
Common Symptoms:
- Display shows "LOC"
- Oven does not accept button presses
- Cannot set temperature or start a cooking cycle
Possible Causes
- Control Lock feature engaged (high)
How to Fix Error LOC
DIY Fix Disable Control Lock
- Ensure oven and timer are off
- Press and hold the Control Lock / START / ENTER button for about 3–5 seconds until LOC clears
- If no dedicated button, consult your model’s manual for the specific button combo
DIY Fix Power Reset if Lock Won’t Clear
- Turn off the circuit breaker or unplug the oven
- Wait one minute
- Restore power and check if LOC is cleared
Technician Only Inspect Control Panel for Faulty Touchpad (if LOC persists)
- Test touchpad functionality
- Check control board and wiring for faults
- Replace touchpad/control board if necessary
Parts needed: Touchpad assembly, Control board (if needed)
- If control lock cannot be disengaged after power reset
- If display or controls remain unresponsive indicating potential hardware failure
Next step
Choose the next step for LOC
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Control Lock Mechanism |
| resistance | |
| part_number | |
| voltage_rating | 120V AC |
Common Questions
What does LOC error mean on Maytag Oven?
The LOC error means the control lock feature is active, making the oven unresponsive.
Can I fix Maytag Oven LOC error myself?
Yes, you can disable the control lock or perform a power reset to fix the LOC error.
How much does it cost to fix LOC error?
The estimated repair cost for the LOC error ranges from $100 to $400.
When should I call a technician for LOC?
Call a technician if the control lock won't disengage after a power reset or if controls remain unresponsive.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!