Maytag Oven Error F97
⚡ Quick Answer: The Maytag oven error code F97 suggests a potential malfunction related to the oven's temperature sensor, which can lead to erratic temperature readin... ✅ DIY Fixable
What Does Error F97 Mean?
The Maytag oven error code F97 suggests a potential malfunction related to the oven's temperature sensor, which can lead to erratic temperature readings or failure to heat properly. If this error appears, the oven may become unresponsive, indicating a need for further diagnosis. Basic troubleshooting steps include resetting the oven by pressing the Cancel button or performing a power reset by disconnecting power for at least 60 seconds. If the error persists, professional assistance may be required to check components such as the control board or sensors.
Common Symptoms:
- Error F97 appears on the oven display
- Oven may not work or may be unresponsive
Possible Causes
- Oven temperature sensor
How to Fix Error F97
DIY Fix Basic checks if F97 appears
- Try clearing the error by pressing the Cancel button to see if it resets the display.
- Perform a power reset by turning off the oven’s circuit breaker or unplugging it for at least 60 seconds, then restore power and check if the error returns.
Technician Only Technician diagnosis when F97 persists
- Diagnose the oven with model-specific service documentation to determine if F97 corresponds to a particular component fault.
- Inspect and test cooling fan motors and associated wiring if applicable.
- Check control board communications and keypad connection for faults.
Parts needed: Control board, Keypad/display assembly, Cooling fan motor or sensors (if applicable)
- If the error code remains after basic resets and the oven fails to operate normally.
- If diagnostic steps require component testing beyond basic visual inspection.
- If there is any safety concern with electrical components.
Next step
Choose the next step for F97
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Cooling Fan Motor
Moves cooling air around hot cooking components and electronic controls.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Oven Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | W10705551 |
| voltage_rating | 120V AC |
Common Questions
What does F97 error mean on Maytag oven?
F97 indicates a potential malfunction with the oven's temperature sensor, leading to erratic heating.
Can I fix Maytag oven F97 error myself?
Yes, try resetting the oven or performing a power reset to clear the error.
How much does it cost to fix F97 error?
Repair costs vary widely depending on diagnosis and parts, especially if a control board replacement is needed.
When should I call a technician for F97?
Call a technician if the error persists after resets or if safety concerns arise with electrical components.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!