Maytag Oven Error F8

⚡ Quick Answer: The Maytag oven error code F8 indicates an issue with the meat probe, specifically that it is not properly connected in its receptacle. This malfuncti... ✅ DIY Fixable

What Does Error F8 Mean?

The Maytag oven error code F8 indicates an issue with the meat probe, specifically that it is not properly connected in its receptacle. This malfunction can prevent the oven from heating or proceeding with cooking cycles. To resolve the issue, first ensure the meat probe is securely inserted into its socket. If the problem persists, a power reset may be necessary to clear any temporary faults.

Common Symptoms:

  • F8 code displays on the oven/range control panel
  • Oven may not proceed with heating or cooking cycle until condition is resolved
  • Occurs when meat probe is disconnected or has poor connection

Possible Causes

  • Meat probe not securely inserted into its receptacle (high)

How to Fix Error F8

DIY Fix Check and Reinsert Meat Probe

  1. Ensure the oven is idle and display is not actively in a cook cycle.
  2. Locate the meat probe receptacle, usually inside the oven cavity.
  3. Firmly reinsert the meat probe into its socket until it seats fully.
  4. Clear the error if possible and attempt to start a cooking cycle.

DIY Fix Reset Oven Power

  1. Turn off the oven at the circuit breaker or unplug it.
  2. Wait one minute.
  3. Restore power to the oven.
  4. Wait one minute to see if the F8 error code reappears before using the oven.

Technician Only Inspect Probe Circuit and Connector

  1. Disconnect power to the oven.
  2. Access the meat probe wiring and receptacle.
  3. Check continuity and secure connections of the meat probe harness.
  4. Replace the receptacle or wiring if damaged or intermittent.

Parts needed: Meat probe receptacle, Meat probe harness/wiring

🛑 When to Call a Pro:
  • If F8 persists after confirming the meat probe is securely connected and after a power reset
  • If the meat probe connector or wiring appears damaged or intermittent

Technical Specifications

wattage
component Oven Temperature Sensor
resistance 1000-1100 ohms
part_number W10603601
voltage_rating 120V AC

Common Questions

What does F8 error mean on Maytag oven?

F8 error indicates the meat probe is not securely connected, preventing the oven from heating.

Can I fix Maytag oven F8 error myself?

Yes, check and reinsert the meat probe, or reset the oven power.

How much does it cost to fix F8 error?

Repair costs range from $20 to $80 for parts, depending on the model.

When should I call a technician for F8?

Call a technician if F8 persists after checking the probe and resetting power.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!