Maytag Oven Error F6
⚡ Quick Answer: The F6 error code on Maytag ovens indicates a malfunction related to the keypad cancel lower function or control signaling, often due to AC line cycle... ✅ DIY Fixable
What Does Error F6 Mean?
The F6 error code on Maytag ovens indicates a malfunction related to the keypad cancel lower function or control signaling, often due to AC line cycle issues or wiring problems. Symptoms include the oven display showing the F6 error, an unresponsive lower keypad cancel button, and the oven failing to accept commands. Addressing this issue may require inspecting the control board and wiring for faults.
Common Symptoms:
- Oven display shows F6 error
- Lower keypad cancel button not responding
- Oven won’t accept commands
Possible Causes
- Control panel signal or AC line cycle sensor issue (medium)
How to Fix Error F6
DIY Fix Power reset and basic check
- Turn off power at the circuit breaker or unplug oven
- Wait at least 60 seconds
- Restore power and check if error returns
- Ensure no buttons are pressed immediately on power up
Technician Only Inspect control board & wiring
- Disconnect oven from power
- Remove control panel cover
- Check wiring harness to control board and AC line cycle sensor (if present)
- Test control board communications and keypad circuitry
- Replace faulty wiring or control board components
Parts needed: Control board, Wiring harness, AC line cycle sensor (if applicable)
- Error persists after power reset
- Visible wiring damage
- Control board tests fail
Next step
Choose the next step for F6
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Temperature Sensor |
| resistance | 1,000-1,200 ohms |
| part_number | W10700193 |
| voltage_rating | 120V AC |
Common Questions
What does F6 error mean on Maytag oven?
F6 error indicates a malfunction in the keypad cancel lower function or control signaling, often linked to AC line cycle issues.
Can I fix Maytag oven F6 error myself?
Yes, you can try a power reset by turning off the oven at the circuit breaker or unplugging it for at least 60 seconds.
How much does it cost to fix F6 error?
The estimated cost to repair the F6 error ranges from $150 to $450, depending on the necessary parts.
When should I call a technician for F6?
Call a technician if the error persists after a power reset, if you see visible wiring damage, or if control board tests fail.
Sources & References
- Maytag Oven Error Code F6 - Maytag Appliance Support (community)
- F6 - Error Code - Range - Product Help (official)
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!