Maytag Oven Error F23

⚡ Quick Answer: The Maytag oven error F23 typically indicates a malfunction within the temperature sensor, leading to erratic temperature readings or failure to heat ... ✅ DIY Fixable

What Does Error F23 Mean?

The Maytag oven error F23 typically indicates a malfunction within the temperature sensor, leading to erratic temperature readings or failure to heat properly. This issue may compromise your cooking performance and is often accompanied by inconsistent oven behavior.

Possible Causes

  • Temperature Sensor

How to Fix Error F23

DIY Fix Verify Error Code and Model

  1. Confirm the exact error code as displayed (including any formatting like F23 or F23 ERR).
  2. Locate and record your oven's full model number.
  3. Check the official Maytag manuals for your exact model via the Maytag Owner Center by entering your model number.

DIY Fix Basic Power Reset

  1. Turn off the oven at the circuit breaker.
  2. Wait 1–2 minutes.
  3. Turn the circuit breaker back on.
  4. Check if the F23 code reappears.
🛑 When to Call a Pro:
  • If the error persists after power reset and you cannot find the error definition in your model’s official documentation.
  • If there are additional malfunction symptoms (e.g., inability to heat, display unresponsive, unusual noises).

Technical Specifications

wattage
component Temperature Sensor
resistance 1000-1100 ohms
part_number W10731296
voltage_rating 120V AC

Common Questions

What does F23 error mean on Maytag oven?

F23 indicates a malfunction in the temperature sensor, affecting heating performance.

Can I fix Maytag oven F23 error myself?

Yes, you can verify the error code and perform a basic power reset to troubleshoot the issue.

How much does it cost to fix F23 error?

Repair costs for the F23 error vary by model and region.

When should I call a technician for F23?

Call a technician if the error persists after resetting and if you notice additional symptoms like unresponsiveness.

Sources & References

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!