Maytag Oven Error F20
⚡ Quick Answer: The Maytag oven error code F20 suggests a potential issue with the temperature sensor, which may lead to incorrect temperature readings or the oven fa... ✅ DIY Fixable
What Does Error F20 Mean?
The Maytag oven error code F20 suggests a potential issue with the temperature sensor, which may lead to incorrect temperature readings or the oven failing to heat properly. To address this error, verify the model number and the exact error code displayed. Consult your oven's owner manual for specific error codes and troubleshooting guidance. If the problem persists after basic troubleshooting, consider contacting a qualified technician for further assistance.
Possible Causes
- Temperature Sensor
How to Fix Error F20
DIY Fix Verify model and error code format
- Ensure the appliance model number is correct (Maytag oven model).
- Verify the exact displayed error.
- Refer to your specific oven’s owner manual for listed codes.
- If the code appears after a power interruption or miskey press, try clearing by pressing Cancel or powering down briefly (cautious generic step).
- If the error persists after verifying the code and performing basic reset/cancel steps, contact Maytag support or a qualified appliance technician.
Next step
Choose the next step for F20
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | |
|---|---|
| component | Temperature Sensor |
| resistance | 1000-1100 ohms |
| part_number | W10705551 |
| voltage_rating | 120V AC |
Common Questions
What does F20 error mean on Maytag oven?
The F20 error indicates a potential malfunction in the temperature sensor, leading to inaccurate temperature readings.
Can I fix Maytag oven F20 error myself?
Yes, verify the model and error code format, then consult your owner's manual for troubleshooting steps.
How much does it cost to fix F20 error?
Repair costs vary based on model and region; consult a technician for an estimate.
When should I call a technician for F20?
If the error persists after verifying the code and performing basic troubleshooting, contact a technician.
Sources & References
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!