Maytag Oven Error F14

⚡ Quick Answer: The Maytag oven F14 error indicates an issue with the temperature sensor or control panel, leading to erratic temperature readings or failure to prehe... ✅ DIY Fixable

What Does Error F14 Mean?

The Maytag oven F14 error indicates an issue with the temperature sensor or control panel, leading to erratic temperature readings or failure to preheat. Symptoms include an F14 display, unresponsive controls, and potential operational shutdown. Common causes are a faulty or disconnected temperature sensor and issues with the control panel or wiring connections. Performing basic resets and checking connections may help resolve the issue.

Common Symptoms:

  • Oven display shows F14 and oven may shut down or cease normal operation
  • Controls may become unresponsive
  • Error appears after power-up or component disconnection

Possible Causes

  • Faulty or disconnected oven temperature sensor (medium)
  • Control panel/ribbon connector issue (touchpad or control board) (medium)

How to Fix Error F14

DIY Fix Basic checks and reset

  1. Turn the oven off and disconnect power at the circuit breaker for 1–2 minutes.
  2. Reconnect power and observe whether the F14 error returns.
  3. Ensure oven controls and display connections are clean and dry.

Technician Only Inspect and Repair Sensor or Control Connections

  1. Disconnect power to the oven.
  2. Access the oven cavity and locate the temperature sensor probe.
  3. Visually inspect the sensor and wiring for damage or disconnection.
  4. Use a multimeter to test the sensor resistance (approx. 1100 ohms at room temp).
  5. Check the control panel ribbon cable and its connection to the control board.
  6. Replace the temperature sensor or repair wiring/connectors as needed.
  7. If sensor and wiring are good, diagnose the control board/touchpad assembly.

Parts needed: Oven temperature sensor probe, Wiring harness/connectors, Control panel/touchpad or control board

🛑 When to Call a Pro:
  • If the error persists after basic resets and visual checks
  • If you are uncomfortable opening the oven’s access panels
  • If tests indicate faulty control board or intermittent wiring faults

Technical Specifications

wattage N/A
component Temperature Sensor
resistance 1000-1100 ohms
part_number W10823616
voltage_rating 120V AC

Common Questions

What does F14 error mean on Maytag oven?

F14 indicates a malfunction in the temperature sensor, causing erratic readings or preheating failures.

Can I fix Maytag oven F14 error myself?

Yes, you can perform basic resets and check connections. Turn off power for 1–2 minutes and reconnect.

How much does it cost to fix F14 error?

Repair costs range from $50 to $300+, depending on parts and labor.

When should I call a technician for F14?

Call a technician if the error persists after resets or if you are uncomfortable with repairs.

Data last verified: 2026-02-06

User Comments (0)

Share your experience or solution below.

Be the first to comment!