Maytag Oven Error F13
⚡ Quick Answer: The Maytag oven error code F13 typically indicates a malfunction related to the temperature sensor, leading to inaccurate temperature readings or impr... ✅ DIY Fixable
What Does Error F13 Mean?
The Maytag oven error code F13 typically indicates a malfunction related to the temperature sensor, leading to inaccurate temperature readings or improper heating. If this error appears on your display, it may disrupt your cooking process. A common first step to resolve the issue is to power cycle the oven, which can sometimes restore normal functionality. If the error persists, further evaluation may be necessary as the root cause remains undetermined.
Common Symptoms:
- Error F13 appears on display of Maytag wall ovens
Possible Causes
- Temperature Sensor
How to Fix Error F13
DIY Fix Power cycle the oven
- Turn off the circuit breaker that supplies power to the oven.
- Wait approximately 60 seconds.
- Turn the circuit breaker back on.
- Attempt to start a cooking cycle and observe whether F13 returns within 1 minute.
Technician Only Contact Maytag service for diagnosis
- If the error persists after a power reset, contact Maytag support or a qualified appliance technician.
- Provide the oven model and serial number when scheduling service.
- Request diagnosis of the F13 code using Maytag internal service documentation.
- If the F13 error persists after power cycling and normal operation cannot resume.
- If any unusual smells, smoke, or failure to start bake/clean cycles accompany the F13 error.
Next step
Choose the next step for F13
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Oven parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Non-Scratch Cooktop Cleaner
A routine surface-care product. Confirm that it is approved for the specific glass, ceramic, enamel, or stainless finish.
Oven Thermometer
A diagnostic aid for comparing cavity temperature during a controlled check. It does not prove which internal component has failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F13 error mean on Maytag oven?
F13 indicates a potential temperature sensor issue, leading to erratic heating.
Can I fix Maytag oven F13 error myself?
Yes, try power cycling the oven by turning off the circuit breaker for 60 seconds.
How much does it cost to fix F13 error?
Repair costs vary by model and region; consult a technician for specific estimates.
When should I call a technician for F13?
Contact a technician if the F13 error persists after power cycling or if you notice unusual smells or smoke.
Sources & References
- F13 - Wall Oven - Product Help | Maytag (official)
- Error Code - Product Help | Maytag (official)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!