Kenmore Washing Machine Error LS
⚡ Quick Answer: The Kenmore washing machine LS error indicates a malfunction in the lid or door lock mechanism, preventing the washer from starting or progressing pas... ✅ DIY Fixable
What Does Error LS Mean?
The Kenmore washing machine LS error indicates a malfunction in the lid or door lock mechanism, preventing the washer from starting or progressing past the initial cycle. This issue may occur due to a faulty lid switch that fails to register closure, causing the machine to behave as if the lid is open. It is often displayed alongside the F26 error code.
Common Symptoms:
- Washer won’t start or proceed past initial cycle stage
- Error code "LS" (sometimes alongside F26) displayed on control panel
- Machine behaves as if lid is open/unlocked even when closed
Possible Causes
- Faulty or non‑registering lid switch (medium)
- Lid not fully closed/not sensed (medium)
How to Fix Error LS
DIY Fix Check lid position and sensor cleanliness
- Ensure washer lid is fully closed; remove any obstructions preventing closure
- Open and close lid firmly to re‑engage the switch
- Clean the lid switch sensors and surrounding area with a dry cloth or lightly with isopropyl alcohol if accessible
Technician Only Test and replace lid switch or associated hardware
- Disconnect power and access the lid switch assembly
- Test the lid switch with a multimeter for continuity when the lid is closed
- Inspect wiring harness and connectors for damage or corrosion
- Replace lid switch assembly if it fails continuity or shows physical damage
Parts needed: Lid switch assembly, Associated wiring harness or connector clips
- If the lid switch tests good but error persists
- If wiring harness or control board connectors show damage
- If the washer exhibits additional unrelated error codes or mechanical failures
Next step
Choose the next step for LS
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door or Lid Switch
Detects whether the appliance door or lid is safely closed before operation.
- Typical part-only price
- $15 - $55
- DIY difficulty
- Medium
- Estimated time
- 20-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does LS error mean on kenmore washing machine?
LS error signifies a lid switch malfunction, preventing the washer from starting.
Can I fix kenmore washing machine LS error myself?
Yes, check the lid position and clean the lid switch sensor.
How much does it cost to fix LS error?
Repair costs for LS error range from $30 to $120 for parts only.
When should I call a technician for LS?
Call a technician if the error persists after testing the lid switch or if wiring shows damage.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!