Kenmore Washing Machine Error F02
⚡ Quick Answer: The Kenmore washing machine F02 error indicates a drainage issue, often resulting in the washer stopping mid-cycle with water still inside. This error... ✅ DIY Fixable
What Does Error F02 Mean?
The Kenmore washing machine F02 error indicates a drainage issue, often resulting in the washer stopping mid-cycle with water still inside. This error can occur when the washer is not draining properly or takes too long to drain, potentially causing unusual sounds during operation. Common causes include a clogged drain pump filter or debris in the pump assembly. Addressing these drainage issues promptly can prevent further complications and ensure your washer operates efficiently.
Common Symptoms:
- Washer stops during cycle with water remaining inside.
- Washer displays F02 or F2 during or after the wash cycle.
- Drain/spin cycles may partially work but main cycle shows error.
- Water doesn’t exit machine leading to prolonged or inefficient cycles.
Possible Causes
- Clogged drain pump filter or debris in pump assembly (medium)
- Possible control board or electrical issue preventing pump activation (low)
How to Fix Error F02
DIY Fix Basic Drainage Troubleshooting
- Unplug the washer and turn off water supply.
- Check for kinks or bends in the drain hose and straighten them.
- Inspect the drain hose for visible blockages and remove debris if accessible.
- Locate and clean the drain pump filter (usually behind front access panel).
- Run a drain/spin cycle to see if the F02 clears.
Technician Only Advanced Drain Pump and Electrical Diagnosis
- Unplug and remove access panels to inspect the drain pump and filter assembly thoroughly.
- Test the drain pump for electrical continuity and verify if 120 V AC is supplied when engaged.
- Inspect wiring harnesses and control board connections related to drain pump circuitry.
- If pump is found failed, replace with compatible drain pump assembly.
- If electrical supply to pump is absent, further diagnose control board or wiring faults.
Parts needed: Drain pump assembly, Drain hose, Control board (if required), Associated wiring harnesses
- After performing basic checks (hose and filter) without resolution.
- If you detect electrical faults, unusual noises from pump, or inability to access internal parts safely.
Next step
Choose the next step for F02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F02 error mean on Kenmore washing machine?
F02 indicates a drainage issue where the washer stops mid-cycle with water remaining inside.
Can I fix Kenmore washing machine F02 error myself?
Yes, you can troubleshoot by checking the drain hose for kinks and inspecting the drain pump filter for clogs.
How much does it cost to fix F02 error?
Repair costs for the F02 error typically range from $50 to $300, depending on parts and labor.
When should I call a technician for F02?
Call a technician if basic checks do not resolve the issue or if you notice electrical faults or unusual noises.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!