Kenmore Washing Machine Error TE
⚡ Quick Answer: The Kenmore washing machine TE error indicates a malfunction in the thermistor, which is responsible for monitoring water temperature. This can lead t... ⚠️ Difficulty Varies
What Does Error TE Mean?
The Kenmore washing machine TE error indicates a malfunction in the thermistor, which is responsible for monitoring water temperature. This can lead to inaccurate temperature readings and disrupt the washing cycle, causing the machine to stop and display the TE code. To address this issue, inspect the wiring for damage and ensure all connections are secure. If the error persists, professional assistance may be required to test and replace the faulty thermistor.
Common Symptoms:
- Error appears on display during wash cycles when temperature sensing is expected
- Washer stops operation and displays tE instead of normal cycle progress
Possible Causes
- Faulty thermistor (water temperature sensor) (medium)
How to Fix Error TE
DIY Fix Inspect sensor wiring and reset power
- Unplug the washer from power (turn off breaker or unplug cord).
- Visually inspect accessible wiring harnesses connected to the temperature sensor for loose connectors or obvious damage.
- Reconnect any loose connectors securely.
- Restore power and attempt a restart of the cycle to see if the error clears.
Technician Only Test and replace thermistor (temperature sensor)
- Disconnect power to the machine.
- Access the thermistor location per model-specific service manual.
- Measure thermistor resistance at room temperature and compare to manufacturer’s specification.
- If resistance is out of range or sensor is open/shorted, replace the thermistor assembly.
- Verify wiring continuity from thermistor to control board and repair harness if needed.
Parts needed: Thermistor / temperature sensor, Wiring harness or connector if damaged
- If error persists after inspecting wiring and basic checks
- If you are not comfortable accessing internal components or testing parts safely
- If there is evidence of water damage or electrical fault beyond the temperature sensor
Next step
Choose the next step for TE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does TE error mean on kenmore washing machine?
TE error indicates a fault in the temperature sensor, disrupting wash cycles.
Can I fix kenmore washing machine TE error myself?
Yes, you can inspect wiring and reset power, but ensure it's safe to do so.
How much does it cost to fix TE error?
Repair costs range from $30 to $120, depending on the part and model.
When should I call a technician for TE?
Call a technician if the error persists after basic checks or if you're unsure about safety.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!