Kenmore Washing Machine Error LID

⚡ Quick Answer: The Kenmore washing machine LID error code indicates that the lid is not detected as closed, preventing the machine from starting. This safety feature... ✅ DIY Fixable

What Does Error LID Mean?

The Kenmore washing machine LID error code indicates that the lid is not detected as closed, preventing the machine from starting. This safety feature may be triggered by the lid being left open, the lid latch not being engaged, or a malfunction in the lid switch or lock mechanism. To resolve the issue, ensure the lid is firmly closed and check for obstructions around the lid lock components.

Common Symptoms:

  • Washer will not start a wash cycle and displays "LID" on the control panel when Start is pressed.
  • Opening and closing the lid repeatedly sometimes clears the error.
  • Control panel may refuse to proceed beyond sensing stage if lid is not recognized as closed. turn0

Possible Causes

  • Lid not fully closed or latch not engaged (medium)
  • Faulty lid switch or lid lock mechanism (medium)
  • Obstructions or debris around lid lock components (medium)

How to Fix Error LID

DIY Fix Check and ensure the lid is fully closed

  1. Open the washer lid fully, then close it firmly until it latches.
  2. Ensure no laundry items are caught between the lid and the tub rim that could prevent closure.
  3. Attempt to start the wash cycle again.

DIY Fix Inspect and clean the lid latch and switch area

  1. Unplug the washer from power.
  2. Visually inspect around the lid latch area for debris or buildup.
  3. Use a soft brush or cloth to remove lint or dirt that could prevent the latch from engaging.
  4. Plug the washer back in and test.

Technician Only Test and if necessary replace the lid switch/lock assembly

  1. Disconnect power to the washer.
  2. Remove access panels to reach the lid switch/lock assembly.
  3. Use a multimeter to test continuity of the lid switch when the lid is closed.
  4. Replace the lid switch/lock assembly if it fails continuity testing or shows damage.
  5. Reassemble panels and test operation.

Parts needed: lid switch/lock assembly

🛑 When to Call a Pro:
  • If the error persists after verifying lid closure, cleaning latch area, and replacing the lid switch assembly, stop and contact certified service to diagnose possible control board or sensor wiring issues.

Technical Specifications

wattage N/A
component Door Lock Assembly
resistance 1-5 ohms
part_number W10619844
voltage_rating 120V AC

Common Questions

What does LID error mean on kenmore washing machine?

The LID error indicates the washer's lid is not detected as closed, preventing the cycle from starting.

Can I fix kenmore washing machine LID error myself?

Yes, check if the lid is fully closed and clean the latch area to resolve the issue.

How much does it cost to fix LID error?

Repair costs for the LID error range from $25 to $80 for parts, depending on the model.

When should I call a technician for LID?

Call a technician if the error persists after checking the lid and cleaning the latch area.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!