Kenmore Washing Machine Error LD
⚡ Quick Answer: The Kenmore washing machine LD error indicates a long drain issue, where the washer is taking too long to drain water from the tub. This often results... ✅ DIY Fixable
What Does Error LD Mean?
The Kenmore washing machine LD error indicates a long drain issue, where the washer is taking too long to drain water from the tub. This often results in the washer stopping mid-cycle with water still present in the drum. Common causes include drain path obstructions or a malfunctioning drain pump, which may have a jammed impeller or motor failure.
Common Symptoms:
- Washer stops mid‑cycle with water still in tub
Possible Causes
- Drain path obstruction (high)
- Drain pump malfunction (impeller jammed or motor failure) (medium)
How to Fix Error LD
DIY Fix Check and clear basic drain obstructions
- Turn off washer and unplug power.
- Inspect the drain hose for kinks, twists, or visible clogs and straighten/clear as needed.
- Locate and clean the drain pump filter (if accessible) to remove lint/debris.
- Run a rinse/spin cycle to see if LD clears.
Technician Only Inspect and service drain pump
- Disconnect power and pull washer from wall.
- Access the drain pump assembly (from bottom/front as applicable).
- Check pump impeller for debris or damage; remove obstructions.
- Test pump motor operation and electrical continuity with multimeter.
- Replace pump if impeller is damaged or motor fails.
- Reassemble and test washer operation.
Parts needed: Drain pump assembly, Pump filter (if separate)
- Water remains after basic drain checks and cleaning
- Pump humming without draining
- Uncertainty accessing internal components
Next step
Choose the next step for LD
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
- Typical part-only price
- $35 - $80
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does LD error mean on kenmore washing machine?
The LD error signifies a long drain issue, usually with water remaining in the tub.
Can I fix kenmore washing machine LD error myself?
Yes, you can check for drain obstructions and clean the drain pump filter.
How much does it cost to fix LD error?
Repair costs range from $50 to $150 for parts, plus labor.
When should I call a technician for LD?
Call a technician if water remains after checks, the pump hums without draining, or if you can't access internal components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!