Kenmore Washing Machine Error F29
⚡ Quick Answer: The Kenmore washing machine F29 error indicates a malfunction in the door lock mechanism. This can cause the washer to stop before starting the wash c... ✅ DIY Fixable
What Does Error F29 Mean?
The Kenmore washing machine F29 error indicates a malfunction in the door lock mechanism. This can cause the washer to stop before starting the wash cycle, and the door may not lock properly or unlock at the end of a cycle. If the error persists after resetting the power, it may be due to a faulty door latch, an obstruction around the door latch, or poor electrical connections.
Common Symptoms:
- Washer stops before starting wash cycle with F29 displayed
- Door does not lock properly or will not unlock at end of a cycle
- Washer shows F29 even after resetting power
Possible Causes
- Door latch or door lock mechanism failure (medium)
- Obstruction or foreign object around door latch (medium)
- Poor electrical connection or wiring to door lock assembly (low)
How to Fix Error F29
DIY Fix Basic user troubleshooting for F29
- Ensure the door is fully closed and there are no obstructions on or around the door lid.
- Remove any heavy items or baskets on the washer lid that may exert pressure.
- Unplug the washer from power for several minutes to attempt a reset.
- Open and firmly close the washer door several times to test latch engagement.
Technician Only Inspect and potentially replace door lock assembly
- Disconnect power and remove the front panel to access the door lock mechanism.
- Inspect for physical damage to the latch, obstructions, or worn components.
- Check wiring harness connections between the door lock assembly and control board.
- Test door lock mechanism continuity with a multimeter; replace if faulty.
Parts needed: Door lock/latch assembly, Screws and fasteners, Wiring harness (if damaged)
- If the door lock assembly replacement does not clear the error.
- If wiring harness or control board appears damaged.
- If the washer shows additional unrelated error codes.
Next step
Choose the next step for F29
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Door Lock Assembly
Secures the door shut during operation for safety and signals the control board to run.
- Typical part-only price
- $30 - $75
- DIY difficulty
- Easy
- Estimated time
- 10-20 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Door Latch Assembly
Mechanically secures the appliance door and may operate a door-closed safety switch.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F29 error mean on Kenmore washing machine?
F29 means a door lock malfunction, causing the washer to stop before starting.
Can I fix Kenmore washing machine F29 error myself?
Yes, ensure the door is fully closed, check for obstructions, and try resetting the power.
How much does it cost to fix F29 error?
Repair costs range from $50–$150 for parts, with labor varying by region.
When should I call a technician for F29?
Call a technician if the error persists after replacing the door lock assembly or if you notice damaged wiring.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!