Kenmore Washing Machine Error F27
⚡ Quick Answer: The Kenmore washing machine F27 error indicates a high water level condition, often caused by a faulty water inlet valve or issues with the pressure s... ✅ DIY Fixable
What Does Error F27 Mean?
The Kenmore washing machine F27 error indicates a high water level condition, often caused by a faulty water inlet valve or issues with the pressure switch. This error can lead to excessive water in the drum or unexpected draining, disrupting normal operation. Immediate action should be taken to prevent overflow, including stopping the cycle and turning off the water supply.
Common Symptoms:
- Washer displays F27 on control panel
- Excessive water in drum or prolonged filling
- Washer may overfill or drain unexpectedly
Possible Causes
- Faulty water inlet valve allowing continuous water flow (medium)
- Pressure switch/pressure hose fault preventing correct water level detection (medium)
- Drainage issues misinterpreted as overflow (medium)
How to Fix Error F27
DIY Fix Immediate Safety Actions for F27 Overflow Condition
- Stop the washer cycle and turn off the water supply to the washer
- Unplug the washing machine from power to prevent further water intake
- Check visible hoses for kinks or disconnection that may affect drainage
Technician Only Technician-Level Diagnostics and Repairs
- Test and, if required, replace the water inlet valve assembly if it is stuck open or malfunctioning
- Inspect and test the pressure switch and pressure hose for blockages, cracks, or disconnection; replace as needed
- Clear any blockages in the drain pump, drain hose, and ensure correct drain hose height to prevent siphoning
Parts needed: Water inlet valve, Pressure switch and hose, Drain pump components, Drain hose
- If water continues to enter after shutting off water supply or if internal components like the inlet valve or pressure switch are suspected faulty
- If diagnosis steps do not clear error or water overflow risk persists
Next step
Choose the next step for F27
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Water Inlet Valve
Controls the flow of hot and cold water into the appliance.
- Typical part-only price
- $25 - $60
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Pressure Switch
Detects the water level inside the tub and signals when to start or stop filling.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F27 error mean on Kenmore washing machine?
F27 indicates a high water level condition, often due to a faulty water inlet valve or pressure switch.
Can I fix Kenmore washing machine F27 error myself?
Yes, you can check hoses for kinks, turn off water supply, and unplug the machine to address overflow.
How much does it cost to fix F27 error?
Repair costs range from $80 to $250, depending on parts and labor.
When should I call a technician for F27?
Call a technician if water continues to enter after shutdown or if internal components are suspected to be faulty.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!