Kenmore Washing Machine Error F24
⚡ Quick Answer: The Kenmore washing machine F24 error indicates a malfunction in the water temperature sensor, preventing the washer from accurately measuring or rece... ✅ DIY Fixable
What Does Error F24 Mean?
The Kenmore washing machine F24 error indicates a malfunction in the water temperature sensor, preventing the washer from accurately measuring or receiving water temperature data. This can cause the machine to stop mid-cycle or fail to heat water properly. If the control panel displays F24, it signals an issue that needs attention to ensure the washer operates effectively.
Common Symptoms:
- Washer stops mid-cycle and displays F24
- The washer may not heat water or detect correct water temperature
- Control panel shows F24 rather than continuing the cycle
Possible Causes
- Faulty water temperature sensor (NTC) (medium)
- Loose or disconnected wiring to the temperature sensor (medium)
- Incorrect water temperature entering the washer (low)
How to Fix Error F24
DIY Fix Basic reset and water supply check
- Unplug the washer from the power outlet for at least 30 minutes to reset internal electronics.
- Ensure that both the hot and cold water supply faucets are fully open and delivering water.
- Restart the washer to see if the F24 error persists.
Technician Only Inspect and test temperature sensor and wiring
- Disconnect power and access the lower front or back panel of the washer.
- Locate the water temperature sensor near the tub and inspect the wiring harness connection for looseness or damage.
- Use a multimeter to measure the sensor resistance; compare against specifications for your model to confirm sensor failure.
- Replace the sensor if defective and secure all connections before reassembly.
Parts needed: Water temperature sensor (NTC), Wiring harness/connectors
- If the F24 error persists after basic resets and water supply checks
- If visual inspection or multimeter testing indicates sensor or wiring faults beyond user-level repair capabilities
Next step
Choose the next step for F24
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F24 error mean on kenmore washing machine?
F24 indicates a problem with the water temperature sensor, causing the washer to stop mid-cycle.
Can I fix kenmore washing machine F24 error myself?
Yes, you can try basic resets and check the water supply before seeking professional help.
How much does it cost to fix F24 error?
Estimated repair costs range from $30 to $120 for parts, with additional labor charges possible.
When should I call a technician for F24?
Call a technician if the error persists after basic troubleshooting or if you suspect wiring issues.
Sources & References
- F24 Error Code On My Kenmore Washer - Hunker (community)
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!