Kenmore Washing Machine Error F23
⚡ Quick Answer: The Kenmore washing machine F23 error indicates a fault in the water heating system, typically related to a heating element failure or temperature sen... ⚠️ Difficulty Varies
What Does Error F23 Mean?
The Kenmore washing machine F23 error indicates a fault in the water heating system, typically related to a heating element failure or temperature sensing circuit issue. This error may cause the washer to stop mid-cycle, especially during the fill or heating phases, and may prevent the machine from heating water or detecting water temperature correctly. Inspecting the heating element and associated wiring is crucial for accurate diagnosis and repair.
Common Symptoms:
- Washer stops mid‑cycle and displays F23
- Cycle may halt during fill or heating phase
- Machine may not heat water or detect abnormal water temperature
Possible Causes
- Heating element open or failed (no proper resistance) (medium)
- Loose or damaged wiring to heating element/temperature sensor (medium)
How to Fix Error F23
DIY Fix Basic reset and visual checks
- Unplug the washer from the power outlet for 5–10 minutes.
- Plug the washer back in and see if the code clears.
- Check that the washer was not mid‑cycle during a power interruption.
Technician Only Inspect and test heating system components
- Disconnect power to the washer.
- Access the heating element and associated wiring (typically at rear panel).
- Inspect connectors for corrosion or looseness; reseat firmly.
- Use a multimeter to measure heating element resistance — replace if out of spec.
- Inspect temperature sensor wiring and replace sensor if faulty.
Parts needed: Heating element, Temperature sensor/thermistor, Wiring harness/connectors
- If you are uncomfortable working near electrical components or cannot confidently test resistance with a multimeter.
- If the error persists after basic reset and visual checks.
Next step
Choose the next step for F23
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F23 error mean on kenmore washing machine?
F23 indicates a fault in the water heating system, often a heating element failure.
Can I fix kenmore washing machine F23 error myself?
Yes, you can try a basic reset and check for loose wiring.
How much does it cost to fix F23 error?
Repair costs typically range from $50 to $200 for parts only.
When should I call a technician for F23?
Call a technician if the error persists after basic checks or if you're uncomfortable with electrical components.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!