Kenmore Washing Machine Error F06

⚡ Quick Answer: The Kenmore washing machine F06 error code indicates a motor control unit failure, often related to motor speed detection issues. Symptoms include the... ✅ DIY Fixable

What Does Error F06 Mean?

The Kenmore washing machine F06 error code indicates a motor control unit failure, often related to motor speed detection issues. Symptoms include the error appearing during the spin cycle or shortly after starting, with the washer stopping and possibly unlocking the door after a brief delay. Common causes include a malfunctioning drive motor tachometer, loose wiring, or a faulty motor control board. Unusual sounds during operation may also accompany this error.

Common Symptoms:

  • Error displayed during spin or shortly after start of cycle
  • Washer stops and may unlock door after a short delay
  • Motor fails to spin or operate normally

Possible Causes

  • Drive motor tachometer or motor speed detection failure (medium)
  • Loose or damaged motor/motor control wiring (medium)
  • Faulty motor control board or related electronic control component (medium)

How to Fix Error F06

DIY Fix Basic reset and load check

  1. Unplug the washer from power for 5 minutes to reset control electronics.
  2. Restart the machine with a smaller load to see if error recurs.

Technician Only Inspect motor system and wiring

  1. Disconnect power and remove access panels.
  2. Inspect motor wiring harness and connections to the motor control board for looseness, corrosion, or damage.
  3. Use a multimeter to test continuity of motor windings and tachometer signals.
  4. Replace or repair any damaged wiring or connectors.

Parts needed: motor wiring harness, tachometer assembly, connectors

Technician Only Test/Replace motor control board or motor

  1. Verify control board operation and inspect for burned components or failed capacitors.
  2. If control board diagnostics fail, replace the motor control board.
  3. If motor tests show internal faults, replace the drive motor assembly.

Parts needed: motor control board, drive motor

🛑 When to Call a Pro:
  • If the error persists after resets and basic checks
  • If testing reveals motor or control board faults
  • If you are not comfortable working with electrical components

Technical Specifications

wattage 500W
component Motor Control Board
resistance 5-15 ohms
part_number W10810403
voltage_rating 120V AC

Common Questions

What does F06 error mean on kenmore washing machine?

F06 indicates a motor control unit issue, often linked to motor speed detection failure.

Can I fix kenmore washing machine F06 error myself?

Yes, try resetting the machine by unplugging it for 5 minutes and using a smaller load.

How much does it cost to fix F06 error?

Repair costs range from $50 to $150 for parts, depending on the specific components needed.

When should I call a technician for F06?

Call a technician if the error persists after resets or if you're uncomfortable with electrical repairs.

Data last verified: 2026-02-19

User Comments (0)

Share your experience or solution below.

Be the first to comment!