Kenmore Washing Machine Error F05
⚡ Quick Answer: The Kenmore washing machine error F05 signals a drain pump failure, often accompanied by unusual noises during operation. This error may also indicate... ❌ Professional Repair Recommended
What Does Error F05 Mean?
The Kenmore washing machine error F05 signals a drain pump failure, often accompanied by unusual noises during operation. This error may also indicate a malfunction with the water temperature sensor (NTC) or issues with the water level/pressure sensing system. Common symptoms include the washer stopping mid-cycle, failure to advance to spin or wash, and unexpected water temperature readings during cycles.
Common Symptoms:
- Washer stops mid‑cycle displaying F05
- Cycle won’t advance to spin or wash
- Washer filled but immediately errors
- Unexpected hot water entry in cold wash
Possible Causes
- Water temperature sensor (NTC) malfunction (medium)
- (medium)
How to Fix Error F05
- Check the drain filter for debris: Locate the drain filter, usually at the bottom front of the washer. Open the cover, place a bucket underneath, and slowly unscrew the filter to remove it. Clean any debris and reassemble.
- Inspect the drain hose: Examine the drain hose for kinks or blockages. Disconnect it from the back of the washer and check for clogs. Clear any obstructions and ensure the hose is properly positioned.
- Test the drain pump: Access the drain pump by removing the front panel of the washer. Check for any visible damage or obstructions. Use a multimeter to test the pump for continuity.
- Check the control board: Inspect the control board for any burnt components or loose connections. If you suspect a fault, consider consulting a professional for replacement.
Next step
Choose the next step for F05
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Temperature Sensor
Monitors the internal temperature to ensure correct operation and prevent overheating.
- Typical part-only price
- $15 - $35
- DIY difficulty
- Easy
- Estimated time
- 15-30 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Drain Pump
Pumps waste water out of the appliance during the drain cycle.
Drain Hose
Carries waste water from the drain pump to your home's standpipe or sink drain.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F05 error mean on kenmore washing machine?
F05 indicates a drain pump failure or a malfunctioning water temperature sensor.
Can I fix kenmore washing machine F05 error myself?
No DIY actions are available for this error.
How much does it cost to fix F05 error?
Repair costs vary by model and region.
When should I call a technician for F05?
Call a technician when basic troubleshooting fails.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!