Kenmore Washing Machine Error F01
⚡ Quick Answer: The Kenmore washing machine F01 error indicates a control board malfunction or communication error within the central control unit (CCU). This typical... ✅ DIY Fixable
What Does Error F01 Mean?
The Kenmore washing machine F01 error indicates a control board malfunction or communication error within the central control unit (CCU). This typically results in the washer displaying the F01 code at startup or during operation, leading to a failure to start or function normally. If the error persists after a basic reset, the issue is likely linked to internal control failures rather than sensor or mechanical problems.
Common Symptoms:
- Washer displays F01 on control panel at startup or during a cycle
- Washer fails to start or operate normally after the code appears
- Code persists after basic reset attempts
Possible Causes
- Control board EEPROM or CCU internal failure (medium)
- Loose/corroded or poor control board wiring connections (medium)
How to Fix Error F01
DIY Fix Power Reset and Basic Checks
- Unplug the washer from the electrical outlet.
- Wait at least 5 minutes to allow residual power to discharge.
- Plug the washer back in and attempt to run a cycle.
- If comfortable, visually inspect accessible wiring harnesses at rear panels for obvious loose or disconnected connectors.
Technician Only Diagnose and Replace Control Board / Repair Connections
- Verify error code with diagnostic mode if available on model.
- Check all control board wiring harnesses and connectors for continuity and secure fit.
- Test control board EEPROM/CCU components with appropriate tools per service manual.
- Replace control board and/or repair wiring as needed.
Parts needed: Control board (main electronic control unit), Wiring harness/connectors
- If the F01 code remains after a power reset and basic checks
- If the user is not comfortable inspecting internal wiring
- If multiple error codes appear alongside F01
Next step
Choose the next step for F01
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| note | The previous model-independent part specification was removed. Verify the full model number and diagnosis in the manufacturer's official parts catalog before ordering. |
|---|---|
| part_number | None |
Common Questions
What does F01 error mean on kenmore washing machine?
F01 indicates a control board malfunction, causing startup failure and unresponsive display.
Can I fix kenmore washing machine F01 error myself?
Yes, try a power reset by unplugging the washer for 5 minutes.
How much does it cost to fix F01 error?
Repair costs range from $150 to $400, depending on parts and labor.
When should I call a technician for F01?
Call a technician if the error persists after a reset or if you're uncomfortable inspecting wiring.
Data last verified: 2026-07-31
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!