Kenmore Washing Machine Error CE
⚡ Quick Answer: The Kenmore washing machine error code CE indicates a communication error between the main control board and another key control module, such as the m... ✅ DIY Fixable
What Does Error CE Mean?
The Kenmore washing machine error code CE indicates a communication error between the main control board and another key control module, such as the motor controller or user interface. This error typically prevents the machine from starting and may display a locked door symbol. Common causes include a breakdown in communication or loose and faulty wiring connections.
Common Symptoms:
- Washer displays CE on control panel
- Washer may stop operation after showing CE
- CE often appears immediately or shortly after cycle start
Possible Causes
- Communication breakdown between the main controller and motor controller (medium)
- Loose or faulty wiring/connector between control boards or motor (medium)
How to Fix Error CE
DIY Fix Basic user troubleshooting for CE error
- Press STOP/CANCEL to clear the error display
- Unplug the washer from power for a few minutes and then reconnect to attempt a reset
- Visually inspect accessible wiring and connectors between control boards if comfortable (ensure unit is unplugged before inspecting)
Technician Only Technician-level diagnosis and repair
- Disconnect power and open control panel to access connectors between machine controller, motor controller, and user interface
- Inspect wiring harnesses and quick-disconnects for damage, corrosion, or poor seating; reseat or replace as necessary
- If wiring is intact and CE persists, test communication signals between boards and substitute known-good motor controller or main control board to isolate faulty component
Parts needed: Motor controller board, Main control board, Wiring harness/connectors
- If you are not experienced with electrical diagnostics and the error persists after basic resets and visual checks
- If wiring inspection reveals damage that you cannot safely repair
Next step
Choose the next step for CE
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
- Typical part-only price
- $120 - $280
- DIY difficulty
- Medium
- Estimated time
- 20-40 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Washing Machine parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Washing Machine Cleaner Tablets
Routine tub-cleaning supplies for residue and odor control. They do not repair a mechanical, drainage, or electronic fault.
Braided Washer Inlet Hoses
A maintenance replacement option for visibly worn external fill hoses. Verify thread size, length, and hot/cold connection requirements.
Washer Drain Hose Holder
Helps secure an external drain hose at the standpipe. It does not correct an internal pump or control fault.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | N/A |
|---|---|
| component | Door Lock Assembly |
| resistance | 10-20 ohms |
| part_number | W10782845 |
| voltage_rating | 120V AC |
Common Questions
What does CE error mean on Kenmore washing machine?
CE error indicates a communication issue between the main control board and the motor controller, preventing operation.
Can I fix Kenmore washing machine CE error myself?
Yes, you can try resetting by pressing STOP/CANCEL and unplugging the washer for a few minutes.
How much does it cost to fix CE error?
Repair costs range from $150 to $400, depending on parts and labor.
When should I call a technician for CE?
Call a technician if the error persists after basic troubleshooting or if there's damaged wiring.
Data last verified: 2026-07-25
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!