Indesit Dishwasher Error F02
⚡ Quick Answer: The Indesit Dishwasher error F02 indicates a malfunction in the circulation pump or water fill system. This error may manifest as the dishwasher filli... ✅ DIY Fixable
What Does Error F02 Mean?
The Indesit Dishwasher error F02 indicates a malfunction in the circulation pump or water fill system. This error may manifest as the dishwasher filling with water but failing to circulate it, accompanied by unusual noises. If the F02 error appears on the display, the machine will not progress past the early stages of the wash cycle due to issues with the circulation pump motor, impeller, or water fill solenoid valve.
Common Symptoms:
- Dishwasher fills but no circulation occurs before cycle stops (reported)
- Dishwasher shows F02 on display or via LED pattern
- Dishwasher fails to progress past early cycle stage
Possible Causes
- Circulation pump motor fault (impeller/jam/failed motor) (medium)
- Water fill solenoid valve failure or water fill timeout/obstruction (medium)
How to Fix Error F02
DIY Fix Basic checks before calling technician
- Turn off and unplug dishwasher.
- Check that mains water supply to dishwasher is on and inlet hose isn’t kinked.
- Inspect water inlet filter for debris; clean if necessary.
- Check that dishwasher has actually filled with water during cycle.
- Listen for unusual noises from pump during wash – absence of sound may indicate pump issue.
Technician Only Inspect circulation pump and water inlet components
- Disconnect and isolate dishwasher from power and water.
- Remove lower access panel to expose circulation pump assembly.
- Check pump impeller for debris/jamming; clear obstructions.
- Test pump motor continuity and function with appropriate tools.
- Inspect water inlet solenoid valve and associated filters for proper operation and blockages.
- Verify wiring harness and connectors for pump and inlet valve.
- Test control board signals to pump/inlet valve if mechanical components test OK.
Parts needed: Circulation pump assembly, Inlet solenoid valve, Hoses and filters, Wiring harness connectors
- If after basic checks dishwasher still displays F02 and fails to circulate or fill water.
- If you are uncomfortable accessing internal components or testing electrical parts.
Next step
Choose the next step for F02
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Dishwasher Circulation Pump
Circulates pressurized water through the dishwasher spray arms during the wash cycle.
- Typical part-only price
- $90 - $220
- DIY difficulty
- Hard
- Estimated time
- 60-120 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Wiring Harness
Connects controls, sensors, motors, and other electrical components inside the appliance.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | C00194899 |
| voltage_rating | 230V AC |
Common Questions
What does F02 error mean on Indesit Dishwasher?
The F02 error indicates a malfunction in the circulation pump or water fill system, preventing normal operation.
Can I fix Indesit Dishwasher F02 error myself?
Yes, check the mains water supply, inspect the inlet hose, and clean the water inlet filter.
How much does it cost to fix F02 error?
Repair costs range from $100 to $350, depending on parts and professional labor.
When should I call a technician for F02?
Call a technician if basic checks don't resolve the F02 error or if you are uncomfortable accessing internal components.
Sources & References
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!