Indesit Dishwasher Error F07

⚡ Quick Answer: The Indesit Dishwasher F07 error signifies a drainage issue, commonly linked to a fault with the water turbine or heating component. Symptoms include ... ✅ DIY Fixable

What Does Error F07 Mean?

The Indesit Dishwasher F07 error signifies a drainage issue, commonly linked to a fault with the water turbine or heating component. Symptoms include the F07 code displayed on the panel, ineffective water heating, and poor circulation. Unusual sounds from the pump may also occur, indicating a deeper problem that requires attention.

Common Symptoms:

  • Dishwasher displays F07 on digital panel or shows corresponding LED flash pattern
  • Dishwasher cycle may not heat water properly or may not circulate water effectively

Possible Causes

  • Water turbine (impeller) damage or fault (medium)
  • Heating circuit-related or turbine signal fault (less common interpretation) (low)

How to Fix Error F07

DIY Fix Inspect and Reset Basic Components

  1. Turn off and unplug the dishwasher
  2. Check for debris in the spray arms and around the bottom of the tub
  3. Ensure water supply is on and not restricted
  4. Restart the dishwasher to see if the error clears

Technician Only Replace or Repair Water Turbine/Impeller Assembly

  1. Disconnect power and water to dishwasher
  2. Access lower assembly and remove spray arm and turbine/impeller unit
  3. Inspect for damage or obstruction
  4. Replace faulty turbine/impeller and reassemble

Parts needed: Water turbine/impeller assembly, Seals/gaskets if disturbed

🛑 When to Call a Pro:
  • If water circulation doesn’t improve after spray arm/turbine check
  • If the error persists after basic reset steps

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-30 ohms
part_number C00195212
voltage_rating 230V AC

Common Questions

What does F07 error mean on Indesit Dishwasher?

F07 indicates a drainage problem, often due to water turbine or heating component issues.

Can I fix Indesit Dishwasher F07 error myself?

Yes, you can check for debris in spray arms and ensure the water supply is on.

How much does it cost to fix F07 error?

Repair costs range from $50–$200 for parts, with additional labor costs.

When should I call a technician for F07?

Call a technician if water circulation doesn't improve after your checks or if the error persists.

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!