Indesit Dishwasher Error F08
⚡ Quick Answer: The Indesit Dishwasher F08 error indicates a temperature timeout fault, meaning the appliance failed to reach the required water temperature during th... ✅ DIY Fixable
What Does Error F08 Mean?
The Indesit Dishwasher F08 error indicates a temperature timeout fault, meaning the appliance failed to reach the required water temperature during the wash cycle. This issue can halt the cycle mid-wash and is often accompanied by specific LED light patterns. Common causes include a faulty heating element, thermostat, or NTC sensor, resulting in ineffective heating during operation.
Common Symptoms:
- Cycle stops mid‑wash during heating phase
- Display shows F08 code or specific LED flash pattern (e.g., LED6 ON, LED7 OFF, LED8 OFF, LED9 ON)
Possible Causes
- Heating system not reaching required temperature (e.g., faulty heating element, thermostat, NTC sensor) (medium)
How to Fix Error F08
DIY Fix Perform basic checks and restart
- Turn off and unplug the dishwasher.
- Check that the water supply is connected and turned on.
- Wait a few minutes and plug the dishwasher back in.
- Restart a wash cycle to see if the error recurs.
Technician Only Diagnose and repair heating/temperature components
- Inspect the heating element and associated wiring for continuity and damage.
- Test thermostat and NTC temperature sensor for proper function.
- Check control board relay and connections related to the heating circuit.
- Replace defective parts as identified (heating element, thermostat, sensor, or control board relay).
Parts needed: Heating element, Thermostat/NTC sensor, Control board relay/PCB connectors
- If basic reset and checks do not clear the error.
- If you lack tools/experience to safely test electrical components (heating element, sensors).
- If there are signs of electrical damage, burning smell, or water leaks.
Next step
Choose the next step for F08
Confirm the diagnosis before ordering. An error code can identify the system involved, but it does not prove that a specific part has failed.
Most relevant component to inspect
Heating Element
Heats the water or air inside the appliance to the required temperature.
- Typical part-only price
- $40 - $95
- DIY difficulty
- Medium
- Estimated time
- 30-45 mins
Where can I find the model number?
Check the rating label around the door, lid, frame, rear panel, or inside the appliance cabinet. Use the complete model number, including suffixes.
Verify the complete model and part number on the retailer's compatibility page before ordering.
Other parts options
Check related components first; use model search as a fallback.
Thermostat
Regulates temperature by turning the heating or cooling system on or off.
Thermistor
Measures precise temperature changes and sends resistance feedback to the control board.
Main Control Board
The central brain of the appliance that controls all components, cycles, and timings.
Model-compatible Dishwasher parts
Enter the complete model number to browse compatible replacement parts. This is a model-based parts search, not a diagnosis that a specific component failed.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. We may earn a commission from other qualifying purchases or service requests made through links on this page, at no additional cost to you. Recommendations are based on repair relevance, not commission rate.
Optional routine care
Maintenance supplies
These products support cleaning or routine upkeep. They are separate from the possible repair components above and are not claimed to fix this error code or symptom.
Dishwasher Cleaner and Descaler
Supports routine removal of mineral scale, grease, and odor. It is maintenance, not a repair for a failed pump, valve, or control.
Braided Dishwasher Inlet Hose
For replacement of an externally damaged supply hose. Verify connection size, length, and appliance installation requirements before ordering.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. Recommendations are based on routine-care relevance, not commission rate.
Technical Specifications
| wattage | 30W |
|---|---|
| component | Drain Pump |
| resistance | 10-20 ohms |
| part_number | C00194944 |
| voltage_rating | 230V AC |
Common Questions
What does F08 error mean on Indesit Dishwasher?
F08 indicates a temperature timeout fault where the dishwasher fails to reach the necessary water temperature.
Can I fix Indesit Dishwasher F08 error myself?
Yes, you can perform basic checks like restarting the machine and ensuring water supply.
How much does it cost to fix F08 error?
Repair costs range from $100 to $400+, depending on parts and labor needed.
When should I call a technician for F08?
Call a technician if the error persists after basic checks or if you suspect electrical damage.
Sources & References
- Indesit | Dishwasher Error Codes (official)
Data last verified: 2026-07-22
User Comments (0)
Share your experience or solution below.
Please login to post a comment.
Be the first to comment!