Indesit Dishwasher Error F11

⚡ Quick Answer: The Indesit Dishwasher F11 error code indicates a malfunction in the drain pump, often resulting in the dishwasher's failure to drain water. Symptoms ... ✅ DIY Fixable

What Does Error F11 Mean?

The Indesit Dishwasher F11 error code indicates a malfunction in the drain pump, often resulting in the dishwasher's failure to drain water. Symptoms include the machine stopping mid-cycle, a humming noise from the base, and ineffective water circulation. Common causes include a clogged pump impeller, a failed drain pump motor, or damaged wiring. Addressing these issues promptly can prevent further damage and restore normal operation.

Common Symptoms:

  • Dishwasher attempts to drain but fails
  • Dishwasher stops mid‑cycle with F11 displayed or LED flash pattern indicating F11
  • Humming noise from base and no effective water circulation/drain

Possible Causes

  • Clogged pump impeller or blockage in drain path (medium)
  • Failed or burnt‑out drain/wash pump motor (medium)
  • Loose or damaged pump electrical connector or wiring (medium)

How to Fix Error F11

DIY Fix Check drain filter and remove blockages

  1. Switch off and unplug the dishwasher from mains power.
  2. Open the dishwasher and locate the drain filter and sump area at the base.
  3. Remove any visible debris, food particles, or objects from the filter and impeller area.
  4. Reinstall the filter securely and run a short drain/rinse cycle to check for improvement.

DIY Fix Inspect drain hose and external plumbing

  1. Ensure the drain hose is not kinked, pinched, or clogged.
  2. Check that the hose route to the sink/standpipe is free of obstructions.
  3. Reconnect and secure any loose hose clamps.

Technician Only Test and replace wash/drain pump assembly

  1. Disconnect power and water supply to the dishwasher.
  2. Remove the lower access panel and locate the drain/wash pump assembly.
  3. Disconnect electrical connectors and hoses from the pump.
  4. Test the pump motor for electrical continuity and inspect for burnt smell or visible damage.
  5. Fit a replacement pump if the motor is failed or seized, ensuring correct hose and electrical connections.

Parts needed: Drain/Wash pump assembly

🛑 When to Call a Pro:
  • If the error persists after cleaning filter and checking hoses
  • If you detect electrical burning smells or visible damage around pump wiring
  • If you are uncomfortable performing internal inspections

Technical Specifications

wattage 30W
component Drain Pump
resistance 10-30 ohms
part_number C00195196
voltage_rating 230V AC

Common Questions

What does F11 error mean on Indesit Dishwasher?

F11 indicates a malfunction in the drain pump, often leading to drainage issues.

Can I fix Indesit Dishwasher F11 error myself?

Yes, you can check and clean the drain filter and inspect the drain hose for blockages.

How much does it cost to fix F11 error?

Repair costs range from USD 80 to 200, depending on parts and labor.

When should I call a technician for F11?

Call a technician if the error persists after basic troubleshooting or if you notice electrical damage.

Sources & References

Data last verified: 2026-03-25

User Comments (0)

Share your experience or solution below.

Be the first to comment!