Indesit Dishwasher Error F01

⚡ Quick Answer: The Indesit Dishwasher error F01 indicates that the anti-flood protection has been triggered, often due to water detected in the base or a malfunction... ✅ DIY Fixable

What Does Error F01 Mean?

The Indesit Dishwasher error F01 indicates that the anti-flood protection has been triggered, often due to water detected in the base or a malfunctioning water inlet valve. Symptoms include the dishwasher stopping shortly after starting, LED indicators flashing, and a failure to fill or run cycles. You may also notice water pooling under the machine, which could be due to an internal leak or a faulty sensor.

Common Symptoms:

  • Dishwasher stops shortly after start
  • LED 1 or corresponding LED flashes to indicate F01
  • Dishwasher won’t fill or run a cycle
  • Possible water pooling under machine

Possible Causes

  • Water detected in the base due to internal leak or overflow (medium)
  • Faulty anti‑flood sensor or its switch (medium)

How to Fix Error F01

DIY Fix Check and clear water from base tray

  1. Disconnect the dishwasher from electrical power.
  2. Carefully tilt the dishwasher backwards slightly (with help) to allow any standing water in the base to drain.
  3. Dry out the base completely (use towels or a sponge).
  4. Reconnect power and test to see if the error clears.

DIY Fix Inspect for visible leaks

  1. Check water supply hose connections for leaks.
  2. Check door gasket/seal for wear or damage.
  3. Inspect dishwasher interior for signs of water escaping during cycles.

Technician Only Test and replace anti‑flood sensor or float switch

  1. Disconnect power and water to the dishwasher.
  2. Remove access panels to reach base/flood sensor.
  3. Test sensor continuity with a multimeter.
  4. Replace sensor if faulty and verify correct installation.
  5. Reassemble and test dishwasher operation.

Parts needed: anti‑flood sensor/float switch

🛑 When to Call a Pro:
  • If the leak source is not identifiable or the anti‑flood system repeatedly triggers despite no visible water
  • If water damage around the dishwasher flooring or cabinetry is evident
  • If you are uncomfortable accessing internal components

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 2-4 ohms
part_number C00195315
voltage_rating 230V AC

Common Questions

What does F01 error mean on Indesit Dishwasher?

F01 means the anti-flood system is triggered due to water detected in the base or a malfunctioning inlet valve.

Can I fix Indesit Dishwasher F01 error myself?

Yes, you can check for water in the base tray and inspect for visible leaks.

How much does it cost to fix F01 error?

Estimated repair cost ranges from ¥5,000 to ¥15,000 for the sensor part, plus labor.

When should I call a technician for F01?

Call a technician if you cannot find the leak source, or if the anti-flood system triggers repeatedly without visible water.

Data last verified: 2026-07-07

User Comments (0)

Share your experience or solution below.

Be the first to comment!