Ge Dishwasher Error PF

⚡ Quick Answer: PF means GE Dishwasher error PF indicates a power failure or interruption, often resulting in the display flashing or the unit no... This is typically a DIY fix.

What Does Error PF Mean?

GE Dishwasher error PF indicates a power failure or interruption, often resulting in the display flashing or the unit not starting.

Common Causes

  • Control Board (50% likelihood)
  • Power Supply Issue (30% likelihood)
  • Loose Connections (20% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect Power Supply

    Check the outlet where the dishwasher is plugged in. Ensure it is functioning by testing it with another appliance.

    If the outlet is dead, check your circuit breaker.

  2. Step 2: Examine Wiring Connections

    Open the access panel and inspect all wiring connections to the control board for any loose or damaged wires.

    Tighten any loose connections and replace any damaged wires.

  3. Step 3: Test the Control Board

    Using a multimeter, check the voltage at the control board. If no voltage is present, the control board may need replacement.

    Ensure the dishwasher is disconnected from power before testing.

  4. Step 4: Reset the Dishwasher

    After addressing any issues, reset the dishwasher by holding the Start and Cancel buttons simultaneously for 3 seconds.

    This may clear the error if the underlying issue is resolved.

How to Reset

To reset the GE Dishwasher error PF, hold the Start and Cancel buttons for 3 seconds until the display resets.

Technical Specifications

wattage 1440W
component Control Board
resistance 10-20 ohms
part_number WD21X24900
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the GE Dishwasher error PF myself?

Yes, if you have basic electrical knowledge and tools, you can troubleshoot this error.

How long does it take to resolve the PF error?

Resolving the PF error typically takes about 45-60 minutes depending on the issue.

What causes the GE Dishwasher to show error PF?

This error is usually caused by power supply issues, control board failure, or loose connections.

Should I call a professional for error PF?

If you're uncomfortable working with electrical components, it's best to call a professional.

When should I consider replacing the control board?

If the control board fails to receive power after checking connections, replacement may be necessary.

User Comments (0)

Share your experience or solution below.

Be the first to comment!