Ge Dishwasher Error PRS

⚡ Quick Answer: PRS means GE Dishwasher error PRS indicates a problem with the pump relay, often resulting in unusual humming sounds or the dishwa... This is typically a DIY fix.

What Does Error PRS Mean?

GE Dishwasher error PRS indicates a problem with the pump relay, often resulting in unusual humming sounds or the dishwasher failing to start.

Common Causes

  • Pump Relay (50% likelihood)

Troubleshooting Steps

  1. Step 1: Inspect the Pump Relay

    Remove the dishwasher's lower spray arm and filter to access the pump relay. Check for any visible damage or debris that may be causing it to stick.

    Make sure to clean any debris to prevent future issues.

  2. Step 2: Test the Relay with a Multimeter

    Disconnect the pump relay from the dishwasher's wiring harness. Use a multimeter to check for continuity. If there's no continuity, the relay needs to be replaced.

    Ensure the multimeter is set to the correct setting for testing.

  3. Step 3: Replace the Pump Relay

    If the relay is faulty, install a new one by connecting it to the wiring harness and securing it in place. Reassemble the dishwasher components.

    Double-check all connections before testing the unit.

  4. Step 4: Test the Dishwasher

    Turn the water supply back on and run a short cycle to ensure the error code has cleared and the dishwasher operates normally.

    Listen for any unusual sounds during operation.

How to Reset

To reset the PRS error, turn off the dishwasher and unplug it for 1 minute, then plug it back in and restart the cycle.

Technical Specifications

wattage N/A
component Pump Relay
resistance 0-10 ohms
part_number WD21X24900
voltage_rating 120V AC

Frequently Asked Questions

Can I fix the PRS error myself?

Yes, if you are comfortable with basic electrical components and have the necessary tools.

How long will it take to resolve the PRS error?

Typically, it will take about 45-60 minutes to diagnose and fix the issue.

What causes the PRS error in my GE dishwasher?

The PRS error is usually caused by a stuck pump relay, which can happen due to wear or electrical faults.

Should I call a professional if the error persists?

If you replace the relay and the error continues, it may be best to consult a professional technician.

What happens if I ignore the PRS error?

Ignoring the error may lead to further damage to the dishwasher and could prevent it from functioning properly.

User Comments (0)

Share your experience or solution below.

Be the first to comment!