Ge Dishwasher Error IC0

⚡ Quick Answer: The GE Dishwasher error code IC0 suggests a potential issue with the water inlet valve. This may result in the dishwasher not filling with water and c... ✅ DIY Fixable

What Does Error IC0 Mean?

The GE Dishwasher error code IC0 suggests a potential issue with the water inlet valve. This may result in the dishwasher not filling with water and could be accompanied by unusual noises during operation. To resolve this, it's important to verify the exact error code and model, as well as perform a basic reset by turning off the power for a few minutes. If the error persists, contacting GE Appliance Support or a qualified technician is recommended.

Possible Causes

  • Water Inlet Valve

How to Fix Error IC0

DIY Fix Verify the exact code and model

  1. Check the dishwasher model number on the unit’s rating plate.
  2. Confirm the exact characters shown on the display — some displays use lowercase/uppercase or segment patterns that can be misread.
  3. Refer to the model‑specific user manual or GE support site for the exact error listing.

DIY Fix Basic reset attempt

  1. Turn the dishwasher off at the power switch or circuit breaker.
  2. Wait 1–2 minutes.
  3. Turn power back on and observe whether any error code appears.

Technician Only Contact GE Appliance Support or Authorized Service

  1. Provide the exact display code and model number to support.
  2. Have a technician check for display interpretation errors or control board fault diagnostics specific to your model.
🛑 When to Call a Pro:
  • If the code persists after power cycling and verification steps, contact GE support or a qualified appliance technician.

Technical Specifications

wattage 20W
component Water Inlet Valve
resistance 1-5 ohms
part_number WD15X10003
voltage_rating 120V AC

Common Questions

What does IC0 error mean on GE Dishwasher?

IC0 indicates a possible malfunction with the water inlet valve, causing filling issues.

Can I fix GE Dishwasher IC0 error myself?

Yes, verify the error code and model, then try power cycling the dishwasher.

How much does it cost to fix IC0 error?

Repair costs vary by model and region; contact GE support for estimates.

When should I call a technician for IC0?

Call a technician if the error persists after power cycling and verification.

Sources & References

Data last verified: 2026-01-10

User Comments (0)

Share your experience or solution below.

Be the first to comment!